0005 Wiring point frogs, point motors & LEDs: Planning
2.3 هزار بار بازدید -
2 سال پیش
-
I wanted to have point
I wanted to have point motors to switch points, each with an auxiliary switch controlling a relay to change both frog polarity and some route indication LEDs.
In this video I describe the necessary wiring between these components and work through the necessary calculations for which resistors to use with the LEDs. I also cover the logic for making the LEDs light only along the selected route.
I was greatly helped my several of the Electrical Engineering Basics videos from The Engineering Mindset: Electrical Engineering Basics
Nearer the end I explain some gotchas that arose from how the Peco Electrofrog points work, and finally demonstrate the LEDs working (plus some malfunctioning of the auxiliary switching)
In this video I describe the necessary wiring between these components and work through the necessary calculations for which resistors to use with the LEDs. I also cover the logic for making the LEDs light only along the selected route.
I was greatly helped my several of the Electrical Engineering Basics videos from The Engineering Mindset: Electrical Engineering Basics
Nearer the end I explain some gotchas that arose from how the Peco Electrofrog points work, and finally demonstrate the LEDs working (plus some malfunctioning of the auxiliary switching)
2 سال پیش
در تاریخ 1401/10/20 منتشر شده
است.
2,358
بـار بازدید شده