Scanning & Processing in Table Scan Mode | Creality CR Scan Lizard User Guide
11.5 هزار بار بازدید -
2 سال پیش
-
How to 3D scan and
How to 3D scan and process the data of a target object in table scan mode.
So you just got a CR Scan Lizard from Creality and can't figure out how to use it? Don't worry your not alone and we are all trying to figure out the best practices and workflows for the best results. But to help out and get you started I decided to make this CR Scan Lizard User Guide video series, to get you up and running in minimal time.
This video will cover the steps for 3D scanning a target object in the table scan mode. I will also show how to process the data by using the auto align, how to manually align scan layers, and how to export the model.
☕ Buy Me a Coffee ☕
This all takes a lot of time, energy, and money, so If you want to throw a few bucks and provide monetary support for what I do, you can buy me a coffee at the link below. Just $5 provides a huge boost of confidence (and caffeine) and keeps me going. I am forever grateful. If you don't want to support with money, that's totally fine, and you can always just subscribe to the channel and like the video instead.
https://buymeacoffee.com/draftid
🎤 Connect with Me 🎤
Instagram: Instagram: draftid_au
Facebook: Facebook: DraftIDAU
Discord: Discord: discord
💬 Join Our Community 💬
Let's discuss more on 3D printing at the DraftID Design Studio Discord: Discord: discord
⏰ Timecodes ⏰
0:00 - Intro
0:52 - Aiming the scanner at the target
1:15 - Initializing the turn table bed
1:30 - Scanning the first scan layer
2:08 - Appending to add another scan layer
2:56 - Adjusting the target object to scan at a different angle
3:14 - Removing a bad scan layer
4:01 - Adjusting target object a final time
4:38 - Saving the project file
4:50 - CR Studio software camera controls recap
5:10 - Controlling scan layer visibility
5:19 - Auto alignment
5:55 - How to manually align scan layers
10:12 - Processing the point cloud data
10:46 - Checking the processing results
11:21 - Exporting the final model
11:38 - Outro
⏱️ Quick Tips for 3D Scanning ⏱️
Check out this playlist for 5-minute tips on using the CR Studio 2.0 software and 3D scanning in general.
CR Studio 2.0 Quick Tips
🛒 Where to Buy 🛒
If you want to get yourself one of these amazing scanners you can check these Amazon affiliate links for the best deal. Being an affiliate gives me a little kickback when you make a purchase using my links and therefore supports the channel and helps me grow.
Creality CR Scan Lizard: https://amzn.to/3OHJEJG
CR Scan Lizard Premium kit: https://amzn.to/3OIzwQV
✏️📐 SolidWorks Beginners Course Videos ✏️📐
I also do a lot of videos for beginners using SolidWorks, check them out at the link: https://bit.ly/2GNqkgb
👋 Thanks for watching and I look forward to helping everyone with their CR Scan Lizards!
So you just got a CR Scan Lizard from Creality and can't figure out how to use it? Don't worry your not alone and we are all trying to figure out the best practices and workflows for the best results. But to help out and get you started I decided to make this CR Scan Lizard User Guide video series, to get you up and running in minimal time.
This video will cover the steps for 3D scanning a target object in the table scan mode. I will also show how to process the data by using the auto align, how to manually align scan layers, and how to export the model.
☕ Buy Me a Coffee ☕
This all takes a lot of time, energy, and money, so If you want to throw a few bucks and provide monetary support for what I do, you can buy me a coffee at the link below. Just $5 provides a huge boost of confidence (and caffeine) and keeps me going. I am forever grateful. If you don't want to support with money, that's totally fine, and you can always just subscribe to the channel and like the video instead.
https://buymeacoffee.com/draftid
🎤 Connect with Me 🎤
Instagram: Instagram: draftid_au
Facebook: Facebook: DraftIDAU
Discord: Discord: discord
💬 Join Our Community 💬
Let's discuss more on 3D printing at the DraftID Design Studio Discord: Discord: discord
⏰ Timecodes ⏰
0:00 - Intro
0:52 - Aiming the scanner at the target
1:15 - Initializing the turn table bed
1:30 - Scanning the first scan layer
2:08 - Appending to add another scan layer
2:56 - Adjusting the target object to scan at a different angle
3:14 - Removing a bad scan layer
4:01 - Adjusting target object a final time
4:38 - Saving the project file
4:50 - CR Studio software camera controls recap
5:10 - Controlling scan layer visibility
5:19 - Auto alignment
5:55 - How to manually align scan layers
10:12 - Processing the point cloud data
10:46 - Checking the processing results
11:21 - Exporting the final model
11:38 - Outro
⏱️ Quick Tips for 3D Scanning ⏱️
Check out this playlist for 5-minute tips on using the CR Studio 2.0 software and 3D scanning in general.
CR Studio 2.0 Quick Tips
🛒 Where to Buy 🛒
If you want to get yourself one of these amazing scanners you can check these Amazon affiliate links for the best deal. Being an affiliate gives me a little kickback when you make a purchase using my links and therefore supports the channel and helps me grow.
Creality CR Scan Lizard: https://amzn.to/3OHJEJG
CR Scan Lizard Premium kit: https://amzn.to/3OIzwQV
✏️📐 SolidWorks Beginners Course Videos ✏️📐
I also do a lot of videos for beginners using SolidWorks, check them out at the link: https://bit.ly/2GNqkgb
👋 Thanks for watching and I look forward to helping everyone with their CR Scan Lizards!
2 سال پیش
در تاریخ 1401/05/09 منتشر شده
است.
11,579
بـار بازدید شده