Press for Shoe Repair and Manufacture with Air Pillow PSRP-09.

Press creates a pressing force of up to 1200 pounds (500 kg). Pressing force is set before pressing using adjusting screw. Dimensions: 12”x12”x32” (30cm x 30cm x 76cm). Weight 49 lbs. (19,5 kg)
The press is designed for pressing the soles and heels of shoes when gluing. Using press provides high strength of their attachment unlike the hammering. If we compare with the existing, this press has the following advantages: swiftness work, takes up little space, easy to move, does not consume electricity, breakage excluded due to lack of wearing parts.

Comprising press from the base on which there is a block of 3 jaсks, one of which is designed to press the soles of ordinary shoes, the other - for pressing the sole of high-heeled women's shoes and another - for pressing the heel of shoes. On the same basis there is a rack with a movable power unit. This block can be easily raised, or just as easily lowered, it is automatically fixed in any of the positions. But when you lower this block all the way to the shoes and press on the handle on the unit, it pressed shoe to jack with a very high force: up to 1200 pounds (500 kg.) and stay in this position on its own until you lift this the handle is up. The force that will be created when pressing is set by the user before pressing the handle by turning the screw that is on the top of the power unit. A gasket from speсial rubber is attached to the underside of the pressing plate, which ensures uniform pressing of the entire surface to be glued.

This model of the press is fully consistent with the previous model, but supplemented with an air cushion and clamp. This allows it to be used in the same way as the previous one, and in addition, for gluing the entire sole when the shoe is on the last. Force of pressing adjustable and can will up to 1200 pounds (500 kg.).

https://www.shoe-tools.com/

https://www.ebay.com/itm/Press-for-Sh...

https://www.ebay.com/itm/Shoe-Press-f...