How to Replace the Water Pump, Thermostat w/ Housing, & Serpentine Belt on a 2018 Toyota Sienna
8.2 هزار بار بازدید -
3 سال پیش
-
I would like to make
I would like to make it very clear that this video is more of a “video tutorial” for other mechanics or someone with experience to use this video as a guide on how to do this job(s). I would NOT recommend DIY-er, novice, or amateur mechanics to attempt this, it is definitely a tedious and difficult job. I suggest to watch it just to see what mechanics have to go through to get this specific job(s) done. If you have any questions, drop them in the comments below and I’ll get back to you when I can.
Tools Used:
-Pry bar.
-1/2in pipe (used to extend ratchet for more leverage).
-1/4in air ratchet.
-3/8in air ratchet.
-3/8in ratchet.
-3/8in extension.
-Two different length 14mm sockets.
-12mm socket.
-10mm socket.
-1/4in ratchet.
-1/4in extension.
-12mm socket.
-Two different length 10mm sockets.
-19mm wrench.
-16mm wrench.
-Two different lengths/types of 14mm wrench.
-12mm wrench.
-10mm wrench.
-14mm gear wrench.
-Plier.
-Gear wrench for remove/install S-belt.
-1/2in impact gun.
-21mm socket.
-Two different sizes of flat tip screwdrivers.
-10mm screwdriver-type wrench.
-Vice grip.
-Airlift tool.
-Anti seize.
-Silicone spray.
-Dielectric grease.
Parts Used:
-Waterpump.
-Thermostat w/ housing.
-Serpentine belt (s-belt).
-50/50 premixed PINK antifreeze.
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
Tools Used:
-Pry bar.
-1/2in pipe (used to extend ratchet for more leverage).
-1/4in air ratchet.
-3/8in air ratchet.
-3/8in ratchet.
-3/8in extension.
-Two different length 14mm sockets.
-12mm socket.
-10mm socket.
-1/4in ratchet.
-1/4in extension.
-12mm socket.
-Two different length 10mm sockets.
-19mm wrench.
-16mm wrench.
-Two different lengths/types of 14mm wrench.
-12mm wrench.
-10mm wrench.
-14mm gear wrench.
-Plier.
-Gear wrench for remove/install S-belt.
-1/2in impact gun.
-21mm socket.
-Two different sizes of flat tip screwdrivers.
-10mm screwdriver-type wrench.
-Vice grip.
-Airlift tool.
-Anti seize.
-Silicone spray.
-Dielectric grease.
Parts Used:
-Waterpump.
-Thermostat w/ housing.
-Serpentine belt (s-belt).
-50/50 premixed PINK antifreeze.
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
3 سال پیش
در تاریخ 1400/04/24 منتشر شده
است.
8,247
بـار بازدید شده