NEW İdea How to Make a Digital Inverter Circuit IC IR2153
35.9 هزار بار بازدید -
پارسال
-
NEW İdea How to Make
NEW İdea How to Make a Digital Inverter Circuit IC IR2153
👉Get a free trial of Altium Designer with 365 and 25% off your purchase :
👉 http://www.altium.com/yt/ZAFERYILDIZ 👈
👉Learn about Altium 365, the electronics product design platform that unites PCB design, MCAD, data management, and teamwork: 👉 https://www.altium.com/altium-365
👉Free search engine for the best quality components from Octopart:
👉https://www.octopart.com
👉Subscribe to JLCPCB with the link below and get your discount discounts
👉https://jlcpcb.com/DTT
👉Circuit Diyagram
👉https://drive.google.com/file/d/1OY42...
Step 1: IR2153 Integrated Circuit
IR2153 is a control integrated circuit that works with a high and low side driver. This IC is ideal for high-efficiency inverters, power supplies, motor drivers, and similar applications. The use of IR2153 IC reduces the complexity of such applications and also provides higher performance.
Step 2: Basic Circuit Diagram
The first step in designing a digital inverter circuit is to prepare the basic circuit diagram. The digital inverter circuit designed using the IR2153 IC consists of the following basic elements:
IR2153 IC
N-channel and P-channel MOSFET transistors
DC power supply
Load (such as a motor)
The connections of these elements are shown in the following diagram:
Digital Inverter Circuit Diagram
Step 3: Selection of Circuit Elements
The selection of the IR2153 IC and MOSFET transistors depends on the characteristics of the load you are using. Depending on the voltage and current requirements of the load, the DC power supply is also selected. For example, the output voltage and current of the circuit for a motor should be compatible with the voltage and current requirements of the motor.
Step 4: Circuit Design
After preparing the basic circuit diagram, the circuit design is made. In this design, the connections of the IR2153 IC and MOSFET transistors are determined. Additionally, feedback elements are also added to control the output voltage and current of the circuit. These feedback elements are important for ensuring the stability of the circuit.
Step 5: Prototype and Testing of the Circuit
After the circuit design, a prototype is built and tested. Testing the prototype is important to verify the working principle of the circuit. An oscilloscope and a multimeter can be used to check whether the circuit is working properly and whether the output voltage and current are compatible with the requirements of the load.
I hope this helps!
For sponsoring my video Thank You Altium Designer
#altium
#zaferyildiz
#IR2153
#inverter
👉Get a free trial of Altium Designer with 365 and 25% off your purchase :
👉 http://www.altium.com/yt/ZAFERYILDIZ 👈
👉Learn about Altium 365, the electronics product design platform that unites PCB design, MCAD, data management, and teamwork: 👉 https://www.altium.com/altium-365
👉Free search engine for the best quality components from Octopart:
👉https://www.octopart.com
👉Subscribe to JLCPCB with the link below and get your discount discounts
👉https://jlcpcb.com/DTT
👉Circuit Diyagram
👉https://drive.google.com/file/d/1OY42...
Step 1: IR2153 Integrated Circuit
IR2153 is a control integrated circuit that works with a high and low side driver. This IC is ideal for high-efficiency inverters, power supplies, motor drivers, and similar applications. The use of IR2153 IC reduces the complexity of such applications and also provides higher performance.
Step 2: Basic Circuit Diagram
The first step in designing a digital inverter circuit is to prepare the basic circuit diagram. The digital inverter circuit designed using the IR2153 IC consists of the following basic elements:
IR2153 IC
N-channel and P-channel MOSFET transistors
DC power supply
Load (such as a motor)
The connections of these elements are shown in the following diagram:
Digital Inverter Circuit Diagram
Step 3: Selection of Circuit Elements
The selection of the IR2153 IC and MOSFET transistors depends on the characteristics of the load you are using. Depending on the voltage and current requirements of the load, the DC power supply is also selected. For example, the output voltage and current of the circuit for a motor should be compatible with the voltage and current requirements of the motor.
Step 4: Circuit Design
After preparing the basic circuit diagram, the circuit design is made. In this design, the connections of the IR2153 IC and MOSFET transistors are determined. Additionally, feedback elements are also added to control the output voltage and current of the circuit. These feedback elements are important for ensuring the stability of the circuit.
Step 5: Prototype and Testing of the Circuit
After the circuit design, a prototype is built and tested. Testing the prototype is important to verify the working principle of the circuit. An oscilloscope and a multimeter can be used to check whether the circuit is working properly and whether the output voltage and current are compatible with the requirements of the load.
I hope this helps!
For sponsoring my video Thank You Altium Designer
#altium
#zaferyildiz
#IR2153
#inverter
پارسال
در تاریخ 1401/12/21 منتشر شده
است.
35,946
بـار بازدید شده