Using U-boot ums to load images on TechNexion hardware
3.6 هزار بار بازدید -
4 سال پیش
-
It is convenient to use
It is convenient to use U-boot’s ums command to load e.MMC over USB OTG. Unlike uuu, you don’t have to change the boot configuration of the board. And you can use common off-the-shelf or preinstalled programs on your host to load images, as well as nice 3rd party tools like Balena Etcher. This tutorial video takes you through the process.
4 سال پیش
در تاریخ 1399/07/11 منتشر شده
است.
3,678
بـار بازدید شده