Eachine Wizard X220 Initial Setup & Upgrade to Betaflight 3.1
263.1 هزار بار بازدید -
8 سال پیش
-
Please consider supporting me at:
Please consider supporting me at: www.patreon.com/thedroneracingengineer
Purchase the Eachine Wizard X220 here: https://goo.gl/yDyngU
---
The real performance capability of the Eachine Wizard is unlocked when you install Betaflight 3.1. I'll show you how to upgrade your Wizard to Betaflight 3.1, including a full walkthrough of all the configuration options. If you just want to cut to the chase, the configuration dump is below in the video description, and you can paste it in and get flying as fast as you like.
For more about this copter, check out the other videos in this playlist:
Eachine Wizard X220 Test / Tune / Review
---
Configuration dump is below. Paste this into the CLI to copy my config. YOU MUST VERIFY FAILSAFE, CHANNEL MAPPING, AND OTHER BASIC OPTIONS BEFORE FLYING! Watch the video if you don't know what i mean.
version
Betaflight / SPRACINGF3 3.1.0 Jan 21 2017 / 14:57:45 (951e827)
feature
feature -RX_PPM
feature RX_SERIAL
feature TELEMETRY
feature AIRMODE
map
map TAER1234
serial
serial 1 32 115200 57600 0 115200
serial 2 64 115200 57600 0 115200
aux
skip these lines if you intend to use stick arming
aux 0 0 0 900 1200
aux 1 12 2 1800 2100
rxfail
rxfail 3 h
master
set min_check = 1005
set min_throttle = 1035
set max_throttle = 1990
set serialrx_provider = SBUS
set align_board_yaw = 270
set gyro_sync_denom = 2
set failsafe_delay = 5
set blackbox_rate_denom = 2
profile
profile 0
set vbat_pid_compensation = ON
rateprofile 0
rateprofile
rateprofile 0
set rc_rate = 155
set rc_rate_yaw = 120
Purchase the Eachine Wizard X220 here: https://goo.gl/yDyngU
---
The real performance capability of the Eachine Wizard is unlocked when you install Betaflight 3.1. I'll show you how to upgrade your Wizard to Betaflight 3.1, including a full walkthrough of all the configuration options. If you just want to cut to the chase, the configuration dump is below in the video description, and you can paste it in and get flying as fast as you like.
For more about this copter, check out the other videos in this playlist:
Eachine Wizard X220 Test / Tune / Review
---
Configuration dump is below. Paste this into the CLI to copy my config. YOU MUST VERIFY FAILSAFE, CHANNEL MAPPING, AND OTHER BASIC OPTIONS BEFORE FLYING! Watch the video if you don't know what i mean.
version
Betaflight / SPRACINGF3 3.1.0 Jan 21 2017 / 14:57:45 (951e827)
feature
feature -RX_PPM
feature RX_SERIAL
feature TELEMETRY
feature AIRMODE
map
map TAER1234
serial
serial 1 32 115200 57600 0 115200
serial 2 64 115200 57600 0 115200
aux
skip these lines if you intend to use stick arming
aux 0 0 0 900 1200
aux 1 12 2 1800 2100
rxfail
rxfail 3 h
master
set min_check = 1005
set min_throttle = 1035
set max_throttle = 1990
set serialrx_provider = SBUS
set align_board_yaw = 270
set gyro_sync_denom = 2
set failsafe_delay = 5
set blackbox_rate_denom = 2
profile
profile 0
set vbat_pid_compensation = ON
rateprofile 0
rateprofile
rateprofile 0
set rc_rate = 155
set rc_rate_yaw = 120
8 سال پیش
در تاریخ 1395/11/05 منتشر شده
است.
263,167
بـار بازدید شده