012 - STM32F1 GPIO INPUT OUTPUT LIBRARY FROM SCRATCH
10 هزار بار بازدید -
5 سال پیش
-
The objective of the video
The objective of the video is to create a Library for the input detection and the blinking green LED of the Blue Pill, the steps the link for code of this video is add bellow
Github: https://github.com/weewStack/STM32F1-...
Steps:
1- Take a look to the memory on the referrence manual
2- Define the addressed of the registers RCC and GPIO
3- Setup the function to manage all the cases for Read and Write
4- Create the toggle function based on Read and Write function
Link for the board:
https://www.amazon.com/Aideepen-STM32...
Link for the debugger:
https://www.amazon.com/Aideepen-STM32...
Github: https://github.com/weewStack/STM32F1-...
Steps:
1- Take a look to the memory on the referrence manual
2- Define the addressed of the registers RCC and GPIO
3- Setup the function to manage all the cases for Read and Write
4- Create the toggle function based on Read and Write function
Link for the board:
https://www.amazon.com/Aideepen-STM32...
Link for the debugger:
https://www.amazon.com/Aideepen-STM32...
5 سال پیش
در تاریخ 1398/08/18 منتشر شده
است.
10,014
بـار بازدید شده