Shrink Plastic and UV Resin Doming
40.5 هزار بار بازدید -
6 سال پیش
-
I highly suggest you watch
I highly suggest you watch AmyMade's Video about shrink plastic Shrink Plastic for Beginners: Colorin...
I had an issue with UV Resin popping/peeling off of my Shrink Plastic creations. SO SAD! So I hope this might help you guys IF you have the same problem.
There's actually bunch of different methods/solutions such as drawing and doming on the rough side of the Shrink Plastic, using embossing powder to dome, or drawing with Posco markers and doming with Epoxy Resin instead. Unfortunately, I don't have any of those materials in my possession and I particularly prefer to draw with permanent marker on the smooth side and color on the rough side for a 3D-ish effect. But if this method is also not for you, I'd highly suggest you check out other people's videos. They've made a lot of great tutorials regarding this subject.
Anyways, instead of buying/ordering new materials, I experimented with things I had around the house already - ACETONE AND MOD PODGE :D (Suggested by other people) And so that's what I'm using in this video.
Why does the UV Resin doming peel off? Well, cheap UV Resin tend to shrink when curing, and I'm assuming because the permanent marker side of the Shrink Plastic is so smooth that the UV Resin has nothing to grip onto while shrinking. So as a result, the resin kind of retracts itself and ends up just peeling off. shrugs Just a theory. But yeah, in general, cheap UV Resin does not adhere well to non-porous surfaces.
IG: Tomatoda_make
Music: "Good Old Days" by Joakim Karud (joakimkarud)
I had an issue with UV Resin popping/peeling off of my Shrink Plastic creations. SO SAD! So I hope this might help you guys IF you have the same problem.
There's actually bunch of different methods/solutions such as drawing and doming on the rough side of the Shrink Plastic, using embossing powder to dome, or drawing with Posco markers and doming with Epoxy Resin instead. Unfortunately, I don't have any of those materials in my possession and I particularly prefer to draw with permanent marker on the smooth side and color on the rough side for a 3D-ish effect. But if this method is also not for you, I'd highly suggest you check out other people's videos. They've made a lot of great tutorials regarding this subject.
Anyways, instead of buying/ordering new materials, I experimented with things I had around the house already - ACETONE AND MOD PODGE :D (Suggested by other people) And so that's what I'm using in this video.
Why does the UV Resin doming peel off? Well, cheap UV Resin tend to shrink when curing, and I'm assuming because the permanent marker side of the Shrink Plastic is so smooth that the UV Resin has nothing to grip onto while shrinking. So as a result, the resin kind of retracts itself and ends up just peeling off. shrugs Just a theory. But yeah, in general, cheap UV Resin does not adhere well to non-porous surfaces.
IG: Tomatoda_make
Music: "Good Old Days" by Joakim Karud (joakimkarud)
6 سال پیش
در تاریخ 1397/09/10 منتشر شده
است.
40,517
بـار بازدید شده