CNC Build 2.0: CNC Router Parts 4' x 8' CNC Router

I have built the CNC Router Parts 4x8 Pro Kit.  I started by building the base with six legs and the table all made out of 80/20 aluminum extrusion. Then I built the gantry which runs on linear rails along the sides of the table.  I attached the z-axis to the gantry and attached all of the motors and wired everything up. After a little fiddling with Mach3, it seems to work. I finished up by working on the table which is a ¾  inch thick piece of MDF.

http://www.cncrouterparts.com/

Dude, Where's My CNC?
Dude, Where's My CNC?

The CNC Build: Part 1: All About That Base
The CNC Build: Part 1: All About That...

The CNC Build: Part 2
The CNC Build: Part 2

The CNC Build: Part 3
The CNC Build: Part 3

Some of the tools used in this project
Cantilever Clamps: http://amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: http://amzn.to/1sj855F

CNC router parts
http://www.cncrouterparts.com/pro4896...
http://www.cncrouterparts.com/4-axis-...
http://www.cncrouterparts.com/22-kw-p...

To see upcoming projects follow me on social media

Instagram
Instagram: frank.howarth

Twitter
Twitter: FrankHowarth

Facebook
Facebook: FrankMakes

G+
https://plus.google.com/+frankhowarth

• #howto_style
• #woodworking
• #diy
• #cnc_router
• #cnc
• #cnc_wood_router
• #cnc_machine
• #mach3
• #8020
• #aluminum_extrusion
• #cnc_router_parts
• #cncrouterparts