EASY MORTAR JOINT- HOW TO GROUT BRICKS AND STONES

DIY how to grout brick and stone veneer, presented by https://stoneselex.com. You’ll get tips on how to use the grout bag and how to begin with thin veneer grouting  We recommend an S-type mortar like KING 2-1-9. Mix it to the consistency of toothpaste. Make sure it’s not too runny or too thick so that when you put it into the grout bag it doesn’t stream out too easily or that it’s hard to squeeze. There is no exact formula for the consistency of the mixture. Watch Sebastian’s technique for checking when the mortar is ready for use. Squeeze the grout mixture into your joints and begin your DIY stone veneer with mortar joints. Let the grout set for a period of time before you rack or tool the joints and brush out the excess mortar. It’s not like grouting ceramic tile, DO NOT smear the mortar on the surface of your stone veneer as it would be hard to get it off the stone once it has set and dried. Once you’re finished and your workspace is clean, sit back and relax and enjoy your new DIY stone veneers grout installation For more information about thin stone grouting and to find out where you can purchase this DIY stone veneer products visit www.stoneselex.com

• #howto_style
• #diy_how_to_grout_brick_and_stone