DBF900 Continuous band sealer from Packway
25 بار بازدید -
6 سال پیش
-
A sealer like this is
A sealer like this is intended for sealing small bags at a quick rate (conveyor can run at 12m/minute).
Temperature range is 0-399°C.
This sealer is fitted with belts made of heat-resistant fabric and coated with PTFE (Teflon belts). The belts are seamless, so they can be effective and last well.
These belts do not hold heat like the steel belts on some other similar sealers. This means that the cooling blocks are able to cool the sealed area of bag, allowing the seal to form. Steel belts would not allow for proper cooling of the seal.
The maximum load on the conveyor must not exceed 10kg.
The cost of purchase and maintenance should compute to about 2c per seal on a bag with a muffin in it. To achieve this cost-efficiency, the unit needs to be kept clean, cooled down at day-end before power-off, and kept busy, while it is running.
Temperature range is 0-399°C.
This sealer is fitted with belts made of heat-resistant fabric and coated with PTFE (Teflon belts). The belts are seamless, so they can be effective and last well.
These belts do not hold heat like the steel belts on some other similar sealers. This means that the cooling blocks are able to cool the sealed area of bag, allowing the seal to form. Steel belts would not allow for proper cooling of the seal.
The maximum load on the conveyor must not exceed 10kg.
The cost of purchase and maintenance should compute to about 2c per seal on a bag with a muffin in it. To achieve this cost-efficiency, the unit needs to be kept clean, cooled down at day-end before power-off, and kept busy, while it is running.
6 سال پیش
در تاریخ 1397/04/21 منتشر شده
است.
25
بـار بازدید شده