Build Your Own Affordable Hydroponic Grow Tower (Under $50) | Aeroponics | Vertical Garden
515 هزار بار بازدید -
پارسال
-
Build Your Own Affordable Hydroponic
Build Your Own Affordable Hydroponic Tower Garden (Under $50) |How To Build Vertical Garden Tower | DIY Hydroponics
Inspired by Mike's Garden Tower @KeepOnGrowin
$10 Hydroponic Tower Garden Cheap & Easy
This tower is made from six 2-gallon buckets.
Each layer has the capacity to accommodate 4-8 plants per bucket with a growing cell size of 2 inches that fits perfectly with a pool noodle.
The structure is supported vertically by a 3/4" pex pipe. I made a tiny holes around the pipe to create sprinkler like or pattern on each layer of the bucket using a 1/16 drill bit to ensure an even distribution of water to each growing cell/hole. There are 6 in total vertically, so each bucket has it's own individual sprinkler like pattern or mist.
The pump can raise water up to 10 feet in height, and the reservoir is a 5-gallon bucket
Nutrient Solution
10g Masterblend Tomato formula (NPK)
10g Calcium Nitrate (CN)
5g Epsom Salt (Magnesium Sulfate)
5 gallons water
Here is how to make your own nutrient solution
Mix Your Own Hydroponic Nutrient Solu...
Here is where you can get the water pump
➡️https://amzn.to/3UVXWtX
Here is where you can get the Masterblend
➡️ https://amzn.to/43V1BLM
Other supplies I used for my hydroponics needs
➡️ https://www.amazon.com/shop/healingho...
Disclaimer: Some of these products are affiliate links, when you purchase any items from these links. As an Amazon Associate I earn from qualifying purchases without any extra cost from you. This helps support my channel. Thank you!
#hydroponics
#hydroponicsforbeginners
#lettuce
#hydroponique
#hidroponik
#diyhydroponics
#hydroponicfarmingathome
Inspired by Mike's Garden Tower @KeepOnGrowin
$10 Hydroponic Tower Garden Cheap & Easy
This tower is made from six 2-gallon buckets.
Each layer has the capacity to accommodate 4-8 plants per bucket with a growing cell size of 2 inches that fits perfectly with a pool noodle.
The structure is supported vertically by a 3/4" pex pipe. I made a tiny holes around the pipe to create sprinkler like or pattern on each layer of the bucket using a 1/16 drill bit to ensure an even distribution of water to each growing cell/hole. There are 6 in total vertically, so each bucket has it's own individual sprinkler like pattern or mist.
The pump can raise water up to 10 feet in height, and the reservoir is a 5-gallon bucket
Nutrient Solution
10g Masterblend Tomato formula (NPK)
10g Calcium Nitrate (CN)
5g Epsom Salt (Magnesium Sulfate)
5 gallons water
Here is how to make your own nutrient solution
Mix Your Own Hydroponic Nutrient Solu...
Here is where you can get the water pump
➡️https://amzn.to/3UVXWtX
Here is where you can get the Masterblend
➡️ https://amzn.to/43V1BLM
Other supplies I used for my hydroponics needs
➡️ https://www.amazon.com/shop/healingho...
Disclaimer: Some of these products are affiliate links, when you purchase any items from these links. As an Amazon Associate I earn from qualifying purchases without any extra cost from you. This helps support my channel. Thank you!
#hydroponics
#hydroponicsforbeginners
#lettuce
#hydroponique
#hidroponik
#diyhydroponics
#hydroponicfarmingathome
پارسال
در تاریخ 1402/02/01 منتشر شده
است.
515,093
بـار بازدید شده