DTC Alfa-Romeo C104B-7A Short Explanation
143 بار بازدید -
4 سال پیش
-
The video focuses on the
The video focuses on the basic Alfa-Romeo specific diagnostic error code.
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
- an explanation of what a bit is and how a byte is formed
- decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
- Possible causes or errors of the car and its parts describing the mentioned error
We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.
#maxidot #dtc #howto #diagnostictroublecode #alfaromeo
Make:
Alfa Romeo
Code:
C104B-7A
Definition:
Volume Deviation Monitoring - Fluid Leak Or Seal Failure
Description:
Anti-lock Brake System (ABS) Module is detecting an electrical internal failure event.
Cause:
Anti-Lock Brake System (Abs) Module
Failure Type:
Fluid Leak or Seal Failure
This sub type is used for failures where the control module detects that a mechanical component has an unexpected gas or liquid flow in, out, or through the component.
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
- an explanation of what a bit is and how a byte is formed
- decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
- Possible causes or errors of the car and its parts describing the mentioned error
We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.
#maxidot #dtc #howto #diagnostictroublecode #alfaromeo
Make:
Alfa Romeo
Code:
C104B-7A
Definition:
Volume Deviation Monitoring - Fluid Leak Or Seal Failure
Description:
Anti-lock Brake System (ABS) Module is detecting an electrical internal failure event.
Cause:
Anti-Lock Brake System (Abs) Module
Failure Type:
Fluid Leak or Seal Failure
This sub type is used for failures where the control module detects that a mechanical component has an unexpected gas or liquid flow in, out, or through the component.
4 سال پیش
در تاریخ 1399/03/30 منتشر شده
است.
143
بـار بازدید شده