Engwe M20 Seat Upgrade and Power Boost!
37.9 هزار بار بازدید -
پارسال
-
I was already pretty happy
I was already pretty happy with Engwe's new M20 E-Bike, but I wanted to see if I could squeeze just a bit more performance out of the stock hardware after adding the second battery. Turns out, it's as easy as soldering a single resistor! I also wanted to improve the comfort for taller riders, so I designed a 3D printed seat riser, along with a few other minor upgrades to go along with the bike.
With Father's day approaching fast, don't miss the opportunity to surprise the important father in your life with an Engwe E-Bike at an incredible discount! The M20, along with many of Engwe's other models are a great option for getting around off-road while fishing, camping, or hunting in addition to daily commuting.
12/20/23 Update - Still using this bike as my daily commuter, and it's been a great little moped! Be sure to check out my other videos for additional upgrades and subscribe for my 1-year summary video!
Engwe Official Website (Sponsored Link)
https://engwe-bikes.com/?ref=Pilotgeek
Amazon Links
The M20 is now available on Amazon!: https://amzn.to/3qhok69
Bar End Mirror: https://amzn.to/3nfu3se
Upgraded 40A Battery Combiner: https://amzn.to/43EfSOh
3D Print Files
Headlight Gromets: https://www.printables.com/model/4655...
Seat Riser: https://www.printables.com/model/4593...
Resistor Mod - Stack on top of existing resistor and solder in parallel to add 50% power to the controller. I used .005 Ohm 2512 SMD resistors in the link below. Thanks to @strikermon who figured out that a .015 ohm or R015 resistor should result in 1250w or a 25% increase if you want to add just a bit more than stock with less worry of breaking something.
https://www.ebay.com/itm/225221606996...
With Father's day approaching fast, don't miss the opportunity to surprise the important father in your life with an Engwe E-Bike at an incredible discount! The M20, along with many of Engwe's other models are a great option for getting around off-road while fishing, camping, or hunting in addition to daily commuting.
12/20/23 Update - Still using this bike as my daily commuter, and it's been a great little moped! Be sure to check out my other videos for additional upgrades and subscribe for my 1-year summary video!
Engwe Official Website (Sponsored Link)
https://engwe-bikes.com/?ref=Pilotgeek
Amazon Links
The M20 is now available on Amazon!: https://amzn.to/3qhok69
Bar End Mirror: https://amzn.to/3nfu3se
Upgraded 40A Battery Combiner: https://amzn.to/43EfSOh
3D Print Files
Headlight Gromets: https://www.printables.com/model/4655...
Seat Riser: https://www.printables.com/model/4593...
Resistor Mod - Stack on top of existing resistor and solder in parallel to add 50% power to the controller. I used .005 Ohm 2512 SMD resistors in the link below. Thanks to @strikermon who figured out that a .015 ohm or R015 resistor should result in 1250w or a 25% increase if you want to add just a bit more than stock with less worry of breaking something.
https://www.ebay.com/itm/225221606996...
پارسال
در تاریخ 1402/02/09 منتشر شده
است.
37,911
بـار بازدید شده