Grizzly G4000 9x20 4 Bolt Compound Clamp Mod
88.9 هزار بار بازدید -
7 سال پیش
-
Here is the first needed
Here is the first needed modification to you 9x20 Metal Lathe. A 4 bolt clamp used to steady your cutting tool. You can watch the process on making the clamp.
Steve Bedair LINK: http://bedair.org/clamp/9x20clamp.html
This is one of the first improvements needed on the 9 x 20 lathe's. I have included photos from start to finish to build your own clamp. I have also included measurements but please note that these are the measurements that worked for my HF 9 x 20 lathe. All the 9 x 20's are basically the same but exact measurements may differ.
Steve Bedair LINK: http://bedair.org/clamp/9x20clamp.html
This is one of the first improvements needed on the 9 x 20 lathe's. I have included photos from start to finish to build your own clamp. I have also included measurements but please note that these are the measurements that worked for my HF 9 x 20 lathe. All the 9 x 20's are basically the same but exact measurements may differ.
7 سال پیش
در تاریخ 1396/07/02 منتشر شده
است.
88,953
بـار بازدید شده