Outdoor Junction Box for Security Cameras
42.5 هزار بار بازدید -
3 سال پیش
-
https://www.cctvcamerapros.com/jbox - The design team at CCTV Camera Pros always recommends using an outdoor junction box for security camera installations on the exterior of buildings. These junction boxes are completely weatherproof and provide a great storage area for excess cable and connectors. Watch this video to hear Mike explain why he always recommends them.
Here are the main reasons.
1) The junction box provides a housing for the excess cable and addition room required by the cable connectors and power connectors. This includes BNC connectors for analog CCTV cameras and RJ-45 coupler connections for network IP cameras.
2) The junction box can be permanently installed on the building with tapcon screws and sealed with silicone. The camera is mounted to the junction box using predrilled holes and machine screws. If you ever need to take the camera down for service or replace it, it is a very simple operation with the machine screws, instead of dealing with tapcon screws or anchors, and needing to reseal with silicone if the camera was mounted directly to the building.
3) There is a chain that attaches the junction box cover plate to the base plate. This makes installations easier. The camera can be pre-mounted to the plate and dangle in the air while all of the cable is connected and tucked into the junction box base housing.
The weatherproof outdoor junction box featured in this video has universal screw holes / patterns so that it can be used with a large variety of security cameras. CCTV Camera Pros supplies these 4.6 inch and 5.5 inch junction boxrs for use with all of our Viewtron BNC cameras and Viewtron network IP cameras.
IP Cameras
https://www.cctvcamerapros.com/viewtr...
BNC Cameras
https://www.cctvcamerapros.com/bnc-se...
You can learn more about these outdoor junction boxes on this page.
https://www.cctvcamerapros.com/securi...
Here are the main reasons.
1) The junction box provides a housing for the excess cable and addition room required by the cable connectors and power connectors. This includes BNC connectors for analog CCTV cameras and RJ-45 coupler connections for network IP cameras.
2) The junction box can be permanently installed on the building with tapcon screws and sealed with silicone. The camera is mounted to the junction box using predrilled holes and machine screws. If you ever need to take the camera down for service or replace it, it is a very simple operation with the machine screws, instead of dealing with tapcon screws or anchors, and needing to reseal with silicone if the camera was mounted directly to the building.
3) There is a chain that attaches the junction box cover plate to the base plate. This makes installations easier. The camera can be pre-mounted to the plate and dangle in the air while all of the cable is connected and tucked into the junction box base housing.
The weatherproof outdoor junction box featured in this video has universal screw holes / patterns so that it can be used with a large variety of security cameras. CCTV Camera Pros supplies these 4.6 inch and 5.5 inch junction boxrs for use with all of our Viewtron BNC cameras and Viewtron network IP cameras.
IP Cameras
https://www.cctvcamerapros.com/viewtr...
BNC Cameras
https://www.cctvcamerapros.com/bnc-se...
You can learn more about these outdoor junction boxes on this page.
https://www.cctvcamerapros.com/securi...
3 سال پیش
در تاریخ 1400/01/23 منتشر شده
است.
42,522
بـار بازدید شده