Elegoo Mars 3 | First Impressions | Beginner Mistakes
34.3 هزار بار بازدید -
3 سال پیش
-
I talk about my experience
I talk about my experience with the Elegoo Mars 3, the first 3D Resin printer I’ve ever used, as well as explain some of the beginner mistakes I made to hopefully help out my fellow beginners.
Elegoo blog post regarding Lychee Slicer 3.6: https://www.elegoo.com/blogs/news/ele...
If you like what I do and what to support me, you could consider heading over to https://www.buymeacoffee.com/tabletop... and leaving me a tip.
Equipment featured in this video:
- Elegoo Mars 3: https://amzn.to/3JgU1ks
- Elegoo Mercury X Bundle: https://amzn.to/3BfmF2w
- Elegoo Water Washable Resin: https://amzn.to/3GBRFLe
You can check out the full list of equipment I use at https://tabletopackley.com/equipment
Special thanks to SNGN for providing the track playing during the Editors Addendum (https://sngn.bandcamp.com/).
Follow me on Instagram @tabletopackley. You can more content from me on my website at https://tabletopackley.com/.
#3DPrinting #Miniatures #FirstImpressions
Chapters:
00:00 - Intro
00:39 - What's in the Box?!
01:12 - Calibration
01:38 - The First Print
02:02 - Mistake #1
02:43 - RTFM (Read That Friendly Manual (It's doing its best, ok?))
03:19 - Mistake #2
03:52 - Mistake #3
04:28 - Freeing the Model from its Bindings
05:23 - Print Quality
06:08 - DRM
06:25 - Editors Addendum
08:30 - DRM Continued
09:29 - Mistake #4
10:02 - Replacing the FEP Liner
10:31 - Wrap Up
11:18 - Bonus Content: Bloopers and Outtakes
Elegoo blog post regarding Lychee Slicer 3.6: https://www.elegoo.com/blogs/news/ele...
If you like what I do and what to support me, you could consider heading over to https://www.buymeacoffee.com/tabletop... and leaving me a tip.
Equipment featured in this video:
- Elegoo Mars 3: https://amzn.to/3JgU1ks
- Elegoo Mercury X Bundle: https://amzn.to/3BfmF2w
- Elegoo Water Washable Resin: https://amzn.to/3GBRFLe
You can check out the full list of equipment I use at https://tabletopackley.com/equipment
Special thanks to SNGN for providing the track playing during the Editors Addendum (https://sngn.bandcamp.com/).
Follow me on Instagram @tabletopackley. You can more content from me on my website at https://tabletopackley.com/.
#3DPrinting #Miniatures #FirstImpressions
Chapters:
00:00 - Intro
00:39 - What's in the Box?!
01:12 - Calibration
01:38 - The First Print
02:02 - Mistake #1
02:43 - RTFM (Read That Friendly Manual (It's doing its best, ok?))
03:19 - Mistake #2
03:52 - Mistake #3
04:28 - Freeing the Model from its Bindings
05:23 - Print Quality
06:08 - DRM
06:25 - Editors Addendum
08:30 - DRM Continued
09:29 - Mistake #4
10:02 - Replacing the FEP Liner
10:31 - Wrap Up
11:18 - Bonus Content: Bloopers and Outtakes
3 سال پیش
در تاریخ 1400/11/22 منتشر شده
است.
34,364
بـار بازدید شده