How To Wire a Switchboard (Part 1)

How to fit off essential components of a switchboard. Part 2 will be uploaded by the end of this long weekend. Make sure to SUBSCRIBE for more videos like this one almost every day!

Video is full of useful information when learning to fit off switchboards for Electrical Apprentices.

Gear used is listed below. All switchgear is Schneider Brand.

Main Switch: Schneider DCK12458
RCDs: Schneider DOM16695
6A MCBs: Schneider DOM11375
16A MCBs: Schneider DOM11377
20A MCBs: Schneider DOM11378
32A MCB: Schneider DOM11380
Switchboard: PDL by Schneider, PDLDBF30
Cable: 6.0mm conduit wire

WARNING: DO NOT ATTEMPT TO DIY ELECTRICAL WORK UNLESS BY LAW IT IS LEGAL IN YOUR STATE OR COUNTRY.
All work is done at your own risk, information contained in these videos should not serve as professional advice without consulting a Registered Electrician, no responsibility or liability for loss, damage or injury is accepted on behalf of SparkyDave YouTube channel. Videos are produced purely for educational use by Electrical Apprentices, Electricians in specialist industries, insiting interest in the electrical industry and overall entertainment. If you are a home owner in New Zealand, and interested in DIY Electrical work, please check out NZECP 50 (Appliance Repair) and NZECP 51 (Electrical Work) which are very detailed on the WorkSafe website here https://worksafe.govt.nz/laws-and-reg... to see which work is legal to undertake.

• #education
• #how_to_wire_switchboard
• #switchboard
• #switch_board
• #how_to_wire_a_switch_board
• #changeover_a_switch_board
• #replace_switchboard
• #replace_switch_board
• #how_to_fit_off_switch_board
• #fit_off_switchboard
• #fit_off_msb
• #wire_up_msb
• #main_switch_board_wiring
• #main_switch_board
• #switchboard_nz