Paving Slabs Repointing Guide - Patio Dry Mix Cement Pointing Jointing Gap Fill between Flags How to

This How2EveryStep guide shows you how I repointed a Patio with Dry Mix Cement in 10 easy to follow steps:
Step 1: Remove Debris between the Paving Slabs
Step 2: Jet Wash between the Paving Slabs
Step 3: Check all the debris is removed
Step 4: Prepare the Dry Mix Cement
Step 5: Prepare Repointing Tools
Step 6: Repoint between Paving Slabs
Step 7: Sweep the Patio thoroughly
Step 8: Allow the Cement to absorb moisture
Step 9: Fully water the Paving Slab joints
Step 10: Allow Patio to fully dry

Tools/Materials required:
1: Scraper Tool or Kitchen Knife
2: Jet Washer
3: Mixing tray (Oven Tray)
4: Rubber Gloves, Respirator Dust Mask
5: Sand & Cement
6: Soft Bristle Brush
7: Hose or Watering Can
8: Carpet Gripper / Metal Plates / Brick Jointer
9: Brick Layers Trowel

Amazon Links to tools used:
1: Scraper Tool or Kitchen Knife
2: Jet Washer
3: Mixing tray (Oven Tray)
4: Rubber Gloves, Respirator Dust Mask
5: Sand & Cement
6: Soft Bristle Brush
7: Hose or Watering Can
8: Carpet Tucker
https://www.amazon.co.uk/Silverline-2...
9: Brick Layers Trowel