Lisp For AutoCAD Offset Polyline Section
3.5 هزار بار بازدید -
2 سال پیش
-
This program enables the user
This program enables the user to offset a section of a polyline enclosed by two selected points on the polyline.
Upon issuing the command syntax offsec at the AutoCAD command-line, the user is first prompted to specify an offset distance by which the polyline section will be offset to both sides. At this prompt, the last entered offset distance is available as a default option, with an initial default of 1 unit.
The user is then prompted to select a polyline to offset; the program is compatible with lightweight polylines (LWPolylines) of constant or varying width, with straight and/or arc segments, and defined in any UCS construction plane.
Following a valid selection, the user is then prompted to specify two points along the length of the selected polyline enclosing the polyline section to be offset by the program. If either of the selected points does not lie directly on the selected polyline, the program will automatically use a point on the polyline situated closest to the point selected by the user.
1) Download Link Here.
https://drive.google.com/file/d/1976A...
2) Download more lisp (playlist).
AUTOCAD Automatically dimension of pl...
3) AutoCAD Plugin Download.
AutoCAD Area tester Plugin and export...
#lispforcad #polylinesection #AutoCAD_lisp #cadlisp #autocadtutorials
#autolisp #CAD_lisp #Download_CAD_lisp
Upon issuing the command syntax offsec at the AutoCAD command-line, the user is first prompted to specify an offset distance by which the polyline section will be offset to both sides. At this prompt, the last entered offset distance is available as a default option, with an initial default of 1 unit.
The user is then prompted to select a polyline to offset; the program is compatible with lightweight polylines (LWPolylines) of constant or varying width, with straight and/or arc segments, and defined in any UCS construction plane.
Following a valid selection, the user is then prompted to specify two points along the length of the selected polyline enclosing the polyline section to be offset by the program. If either of the selected points does not lie directly on the selected polyline, the program will automatically use a point on the polyline situated closest to the point selected by the user.
1) Download Link Here.
https://drive.google.com/file/d/1976A...
2) Download more lisp (playlist).
AUTOCAD Automatically dimension of pl...
3) AutoCAD Plugin Download.
AutoCAD Area tester Plugin and export...
#lispforcad #polylinesection #AutoCAD_lisp #cadlisp #autocadtutorials
#autolisp #CAD_lisp #Download_CAD_lisp
2 سال پیش
در تاریخ 1401/06/01 منتشر شده
است.
3,540
بـار بازدید شده