How to change a Brother inkjet printer cartridge

This short video will show you how to change the Ink cartridges on a Brother Ink-Jet Printer.The ink cartridges are usually stored on the right hand side of the printer towards the front of the printer.

To the side of the printer you will see a little lip which you pull to open the compartment where the Ink Cartridges are stored.

Then click the little grey lever on top of each cartridge to release if from its housing. Then slide in the refilled or new cartridges, make sure to add each cartridge colour into the correct colour slot.

Push the cartridge in until the level clicks up.

Close the cartridge compartment and you then may have to click a confirmation on the small information console screen to confirm printer setup.

The video should help you with changing the ink cartridges on the following Brother models:
dcp-j562d; mfc-j480dw; mfc-j680dw;  mfc-j880d; dcp-j4120dw; mfc-j4420dw;  mfc-j4620dw;  mfc-j4625dw; mfc-j5320dw; mfc-j5620dw; mfc-j5625dw;  mfc-j5720dw;

• #howto_style
• #brother_printer_ink_cartridge_installation
• #how_to_refill_ink_in_brother_printer
• #brother_ink_replacement
• #brother_dcp_j562dw_ink
• #brother_dcp_j562dw_ink_cartridges
• #brother_printer_change_ink
• #how_to_change_ink_cartridge_brother_mfc_j4510dw
• #brother_mfc_j485dw_ink_refill
• #replace_ink_cartridge_brother
• #brother_mfc_j480dw_ink
• #brother_lc221
• #brother_lc223
• #how_to_install_a_brother_ink_jet_cartridge