Simple Side Table | Build It | Ask This Old House
343.9 هزار بار بازدید -
8 سال پیش
-
This Old House general contractor
This Old House general contractor Tom Silva shows how to construct a simple yet beautiful side table. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for a Simple Side Table:
- 2x2 fir balusters, to make the table legs
- 1x4 fir decking, for fabricating the table aprons
- 5/4-by-6-inch fir decking, to make the tabletop
- Carpenter’s glue, for gluing together wood parts
- Narrow stick, to spread glue
- Cloth, for wiping away excess glue
- _-inch plywood and toggle clamp, to make tapering jig
- 120-grit abrasive disks, for random-orbit sander
- 1_-inch pocket screws, to screw together wood parts
- _-inch-thick spacer blocks, for creating a reveal between the aprons and legs
- Double washers and 5/8-inch screws, for securing the tabletop
- Furniture glides, to fasten to the bottom of each leg
- Primer and paint, wood stain, or clear polyurethane varnish, to finish the table
Tools for a Simple Side Table:
- Miter saw, to crosscut lumber to size
- Table saw, for ripping lumber to size
- Bar clamps, for clamping together the tabletop
- Random-orbit sander, to sand smoother wood parts
- Router and 1/8-inch-radius rounding-over bit, to shape the edges of the table legs
- Pocket-hole jig, for making pocket-hole joints
- Cordless drill, to drill holes and drive screws
- _-inch spade bit, to drill recesses for double washers
- Hammer
To build this table, Tom used stock fir that is normally used for building decks, including:
½" x 6" decking for the top
1" x 4" decking for the spreaders or rails to which the legs attach
2" x 2" balusters for the legs
To attach the rails to the legs, Tom used a pocket hole jig and pocket screws, all manufactured by Kreg Tool Company [https://www.kregtool.com/] and available at home centers and woodworking supply stores.
Expert assistance with this project was provided by Anderson & McQuaid Co, Inc. [https://www.andersonmcquaid.com/]
Build It:
This Old House general contractor Tom Silva, This Old House host Kevin O’Connor, and special guests including Jimmy DiResta, take you through step-by-step DIY projects in this popular video series. From end-tables to cutting boards to wine racks to chicken coops and more, learn how to build from the best pros in the game. Segments include mention of all tools and materials needed to get the job done.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
https://bit.ly/2GPiYbH
Plus, download our app for streaming full episodes to your connected TV, phone or tablet:
https://bit.ly/34RYEP5
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Simple Side Table | Build It | Ask This Old House
thisoldhouse
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for a Simple Side Table:
- 2x2 fir balusters, to make the table legs
- 1x4 fir decking, for fabricating the table aprons
- 5/4-by-6-inch fir decking, to make the tabletop
- Carpenter’s glue, for gluing together wood parts
- Narrow stick, to spread glue
- Cloth, for wiping away excess glue
- _-inch plywood and toggle clamp, to make tapering jig
- 120-grit abrasive disks, for random-orbit sander
- 1_-inch pocket screws, to screw together wood parts
- _-inch-thick spacer blocks, for creating a reveal between the aprons and legs
- Double washers and 5/8-inch screws, for securing the tabletop
- Furniture glides, to fasten to the bottom of each leg
- Primer and paint, wood stain, or clear polyurethane varnish, to finish the table
Tools for a Simple Side Table:
- Miter saw, to crosscut lumber to size
- Table saw, for ripping lumber to size
- Bar clamps, for clamping together the tabletop
- Random-orbit sander, to sand smoother wood parts
- Router and 1/8-inch-radius rounding-over bit, to shape the edges of the table legs
- Pocket-hole jig, for making pocket-hole joints
- Cordless drill, to drill holes and drive screws
- _-inch spade bit, to drill recesses for double washers
- Hammer
To build this table, Tom used stock fir that is normally used for building decks, including:
½" x 6" decking for the top
1" x 4" decking for the spreaders or rails to which the legs attach
2" x 2" balusters for the legs
To attach the rails to the legs, Tom used a pocket hole jig and pocket screws, all manufactured by Kreg Tool Company [https://www.kregtool.com/] and available at home centers and woodworking supply stores.
Expert assistance with this project was provided by Anderson & McQuaid Co, Inc. [https://www.andersonmcquaid.com/]
Build It:
This Old House general contractor Tom Silva, This Old House host Kevin O’Connor, and special guests including Jimmy DiResta, take you through step-by-step DIY projects in this popular video series. From end-tables to cutting boards to wine racks to chicken coops and more, learn how to build from the best pros in the game. Segments include mention of all tools and materials needed to get the job done.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
https://bit.ly/2GPiYbH
Plus, download our app for streaming full episodes to your connected TV, phone or tablet:
https://bit.ly/34RYEP5
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Simple Side Table | Build It | Ask This Old House
thisoldhouse
8 سال پیش
در تاریخ 1395/07/10 منتشر شده
است.
343,919
بـار بازدید شده