Colin Furze Helped me test my TANK
467.1 هزار بار بازدید -
5 ماه پیش
-
AD: Go to:
AD: Go to: https://pvcase.com/JamesBruton try PVcase for free!
Do you remember when Colin Furze built the Rhino tank and then got stuck in a ditch and had to pull it out with a JCB?
The concept was pioneered by Elie Aghnides on the 1950s. The idea being that due to the domed-shaped wheels, the more your sink into mud, the more grip it has.
Colin Furze converted a dumper truck to build his version of the Rhino, but it originally had much smaller wheels. The motors are hydraulic, but there wasn’t enough torque to turn the bigger diameter wheels when it was really needed due to the increased leverage.
My plan is to make a slightly smaller version, and it’ll be electric, and I’ll try to get a large reduction from the motors to the wheels so I can get more relative torque. I’m also going to have a servo controlled camber angle so it can transform.
CAD & Code: https://github.com/XRobots/Rhino
@colinfurze Videos:
This 1950's ATV Concept ?
1950's ATV Concept Build Part 2
My First FAILURE!!
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: Discord: discord
Patreon: Patreon: xrobots
Merchandise: https://teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: Instagram: xrobotsuk
Twitter: Twitter: xrobotsuk
Facebook: Facebook: xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at https://www.3dfuel.com/XROBOTS - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: https://github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: https://www.3dfuel.com/
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: https://simplybearings.co.uk/
Lincoln Electric Welder: https://bit.ly/2Rqhqos
CNC Router: https://bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
CAD content is sponsored by Autodesk Fusion 360
Do you remember when Colin Furze built the Rhino tank and then got stuck in a ditch and had to pull it out with a JCB?
The concept was pioneered by Elie Aghnides on the 1950s. The idea being that due to the domed-shaped wheels, the more your sink into mud, the more grip it has.
Colin Furze converted a dumper truck to build his version of the Rhino, but it originally had much smaller wheels. The motors are hydraulic, but there wasn’t enough torque to turn the bigger diameter wheels when it was really needed due to the increased leverage.
My plan is to make a slightly smaller version, and it’ll be electric, and I’ll try to get a large reduction from the motors to the wheels so I can get more relative torque. I’m also going to have a servo controlled camber angle so it can transform.
CAD & Code: https://github.com/XRobots/Rhino
@colinfurze Videos:
This 1950's ATV Concept ?
1950's ATV Concept Build Part 2
My First FAILURE!!
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: Discord: discord
Patreon: Patreon: xrobots
Merchandise: https://teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: Instagram: xrobotsuk
Twitter: Twitter: xrobotsuk
Facebook: Facebook: xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at https://www.3dfuel.com/XROBOTS - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: https://github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: https://www.3dfuel.com/
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: https://simplybearings.co.uk/
Lincoln Electric Welder: https://bit.ly/2Rqhqos
CNC Router: https://bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
CAD content is sponsored by Autodesk Fusion 360
5 ماه پیش
در تاریخ 1402/12/28 منتشر شده
است.
467,163
بـار بازدید شده