Cycles Temporal Stabilizer - Render Animations up to 40x Faster! Watch in 4k!
32.2 هزار بار بازدید -
2 سال پیش
-
YouTube has destroyed the video
YouTube has destroyed the video making the comparison unappreciable. Check out Vimeo cut down version which has left most of the flicker intact - https://vimeo.com/724674614
Turbo Tools v3 is available from:
https://3dillusions.gumroad.com/l/tur...
https://blendermarket.com/products/tu...
Turbo Tools v3 is a massive update with many new features and improvements. The most notable is the new temporal stabilizer, which in combination with the new option to optimise the sample pre-sets for animations, will allow you to render Cycles animations by as much as 40x faster!
Special thanks to Ivo Wejgaard for providing the excellent test renders and artwork, and also to Alex Weinberg for the office test scene and renders.
Alex's portfolio can be found at : www.AlexRWeinberg.com
Spaceman available from: https://blendermarket.com/products/sp...
Annoyingly YouTube has reduced the video quality quite dramatically with it's own flicker removal, making it difficult to see the effectiveness, but if you select the 4k option you should still see the improvement, particularly at 5:50 and 7:49 . Chapter list below:
0:10 What is a temporal stabilizer for?
0:34 More about the spaceman scene
0:44 How fast is Turbo Render?
1:32 Spaceman!
1:46 The scene that makes denoisers shudder!
2:02 How many samples did Neat Video need to produce a good result with this scene?
2:13 How long does it take to render the 2500 samples Neat Video needed?
2:25 The goal of the video
2:39 Is it difficult to set up for temporal stabilization?
3:14 New animation option to optimize sample presets for animations
3:28 Choosing a good sample preset
4:10 The result of a 1 min Turbo Render
4:27 launch the stabilizer!
5:31 Temporalized 1min render vs Untemporalized 1min render
5:50 17 hour render denoised and stabilised with Neat Video vs 48 minute render denoised and stabilised with Turbo Tools
7:23 High sample preset vs Very High (production quality) sample preset
7:49 How does the stabilizer cope with EXTREME flicker? (thankfully so extreme that YouTube processing was unable reduce it significantly! This is close to how the flicker actually looked during the rest of the video before youtube had a go at it! )
8:02 Does it work with existing compositor setups?
8:43 Is it non destructive?
9:06 Stabilizing individual passes!
9:25 Can you stabilize Cache so that expensive nodes don't need to recalculate during publishing?
9:59 Can you stabilize multiple scenes and viewlayers at once?
10:58 Caveats
12:22 Download the addon and goodbye 👍
Turbo Tools v3 is available from:
https://3dillusions.gumroad.com/l/tur...
https://blendermarket.com/products/tu...
Turbo Tools v3 is a massive update with many new features and improvements. The most notable is the new temporal stabilizer, which in combination with the new option to optimise the sample pre-sets for animations, will allow you to render Cycles animations by as much as 40x faster!
Special thanks to Ivo Wejgaard for providing the excellent test renders and artwork, and also to Alex Weinberg for the office test scene and renders.
Alex's portfolio can be found at : www.AlexRWeinberg.com
Spaceman available from: https://blendermarket.com/products/sp...
Annoyingly YouTube has reduced the video quality quite dramatically with it's own flicker removal, making it difficult to see the effectiveness, but if you select the 4k option you should still see the improvement, particularly at 5:50 and 7:49 . Chapter list below:
0:10 What is a temporal stabilizer for?
0:34 More about the spaceman scene
0:44 How fast is Turbo Render?
1:32 Spaceman!
1:46 The scene that makes denoisers shudder!
2:02 How many samples did Neat Video need to produce a good result with this scene?
2:13 How long does it take to render the 2500 samples Neat Video needed?
2:25 The goal of the video
2:39 Is it difficult to set up for temporal stabilization?
3:14 New animation option to optimize sample presets for animations
3:28 Choosing a good sample preset
4:10 The result of a 1 min Turbo Render
4:27 launch the stabilizer!
5:31 Temporalized 1min render vs Untemporalized 1min render
5:50 17 hour render denoised and stabilised with Neat Video vs 48 minute render denoised and stabilised with Turbo Tools
7:23 High sample preset vs Very High (production quality) sample preset
7:49 How does the stabilizer cope with EXTREME flicker? (thankfully so extreme that YouTube processing was unable reduce it significantly! This is close to how the flicker actually looked during the rest of the video before youtube had a go at it! )
8:02 Does it work with existing compositor setups?
8:43 Is it non destructive?
9:06 Stabilizing individual passes!
9:25 Can you stabilize Cache so that expensive nodes don't need to recalculate during publishing?
9:59 Can you stabilize multiple scenes and viewlayers at once?
10:58 Caveats
12:22 Download the addon and goodbye 👍
2 سال پیش
در تاریخ 1401/03/30 منتشر شده
است.
32,276
بـار بازدید شده