How to Connect up a Contactor Control so 2 way Switching can Control a Large Load

GSH Electrical
GSH Electrical
127.5 هزار بار بازدید - 6 سال پیش - Matt draws out how a
Matt draws out how a contactor can be controlled by 2 way switch and be used to turn on many heavy current drawing loads. We see how many lighting points say in a factory can be turned on by a simple light switch via a contactor.

NOTE: This is a wiring diagram and the cable runs in reality will be completely different. The rated value of the contactor will vary depending on the load current being supplied.

== 🕐 Time Stamps - Cut to the action 🕕 ==

00:00 - Contactor controlled loads
00:30 - Contactor
01:06 - Distribution board
01:56 - 2 way switching
02:48 - Switch to A1 on the contactor
03:25 - Neutral to A2 on the contactor
04:45 - Affect of electricity explained in the coil
05:34 - De-energizing the contactor explained
06:01 - Power to our loads via the contactor
07:30 - Contactor outgoing side to the loads
09:00 - Large loads
10:10 - Circuit is off
10:25 - Circuit is on
11:25 - 54 amps controlled from a 10 amp switch

🔵 The 2 plate method of wiring lighting circuits playlist Taking the Feed (Supply) to the Light...

Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.

You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.  

▶️ FACEBOOK Facebook: gshelectrical

▶️ INSTAGRAM Instagram: BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0

▶️ TWITTER Twitter: gsh_electrical

▶️ TikTok https://vm.tiktok.com/ZMRBLFdhe/

#GSHElectrical #Electricaltrainingvideos
6 سال پیش در تاریخ 1397/10/02 منتشر شده است.
127,548 بـار بازدید شده
... بیشتر