Final Touches to Installing Artificial Grass - Step 9

Bella Turf
Bella Turf
24.4 هزار بار بازدید - 4 سال پیش - Often after infilling, excess infill
Often after infilling, excess infill can get trapped between the outer grass blades and the perimeter wall, causing them to lean away from the wall and press into neighbouring blades.

To remove this infill and allow your outer grass blades to relax, use a shop vac around all edges of your project area that have a perimeter wall. This will give you a loose natural finish to your edges.

For the blades that didn’t get a chance to stand up because of the infill trapped behind them, now is the time to to properly brush them back up against the wall with your power broom.

To remove any debris left on the surface from installation, feel free to use a leaf blower before giving the area a thorough spray down with the hose.

Some infills can leave a light dusting on your grass blades, so it is important to give the blades a good rinse to allow their true colours to show. This will also assure you that there is no infill left on the surface and it is all settled deep into the grass giving you and your loved ones a beautiful artificial grass surface for years of enjoyment to come.

Thanks for watching we hope these steps help you create your own outdoor place to escape. Visit us at bellaturf.ca for more.
4 سال پیش در تاریخ 1399/02/09 منتشر شده است.
24,436 بـار بازدید شده
... بیشتر