Resin Casting Tutorial: Pouring Liquid Plastic Resin into a Mold
328.1 هزار بار بازدید -
17 سال پیش
-
In this resin casting tutorial
In this resin casting tutorial video, we demonstrate pouring Smooth-Cast 300 liquid plastic casting resin into a mold.
Release agent is applied to the mold cavity. Smooth-Cast 300 Part A is dispensed into a mixing container followed by an equal amount of Part B. Both parts are then mixed for about a minute. The liquid plastic is then slowly poured into the mold cavity. In a matter of minutes the mixture turns from liquid to bright white solid. A few minutes after that, it is rigid enough to remove from the mold cavity. The finished casting is a perfect copy of the original model. And with this one mold, you can make one copy or many.
Make It Now! with Smooth-On
http://www.smooth-on.com/
Facebook: SmoothOn
Twitter: SmoothOn
http://www.google.com/+smoothon
~-~~-~~~-~~-~
Adult Supervision Required
Keep Out Of Reach Of Children
~-~~-~~~-~~-~
Release agent is applied to the mold cavity. Smooth-Cast 300 Part A is dispensed into a mixing container followed by an equal amount of Part B. Both parts are then mixed for about a minute. The liquid plastic is then slowly poured into the mold cavity. In a matter of minutes the mixture turns from liquid to bright white solid. A few minutes after that, it is rigid enough to remove from the mold cavity. The finished casting is a perfect copy of the original model. And with this one mold, you can make one copy or many.
Make It Now! with Smooth-On
http://www.smooth-on.com/
Facebook: SmoothOn
Twitter: SmoothOn
http://www.google.com/+smoothon
Adult Supervision Required
Keep Out Of Reach Of Children
17 سال پیش
در تاریخ 1386/11/01 منتشر شده
است.
328,191
بـار بازدید شده