Taranis mods #2 - Hydrodipped shell swap for the FrSky Taranis X9D - QUICK GUIDE
16.2 هزار بار بازدید -
8 سال پیش
-
After the 1st part of
After the 1st part of modding my Taranis X9D Plus, I went ahead and ordered a hydrodipped shell.
I haven't tried to hydrodip myself and I don't currently have the time to familiarize with the techniques required for a good result. So a ready-made shell was the next best option. This also leaves me with the stock shell for future experimentation (painting, DIY hydrodipping etc).
Removing the stock shell and transferring the internals into the new one is pretty much straight forward. Just take your time, as well as a few photos during the disassembly, so that you easily figure out what goes where.
The end result looks great and I already have in mind some more things that will follow.
I also added a small twist..(literally).. Since I am not using an external Tx module, I decided to install the transmitter handle backwards. This results in a sleeker look and a lower profile overall, perfect for transmitter cases (I also add gimbal stick protectors when I pack it in a case).
This is QUICK GUIDE: Taranis mods #2 - Hydrodipped shell swap for the FrSky Taranis X9D. Let's go!
____________________
*If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!
The shell for the Taranis was purchased already hydrodipped and ready to be installed. You can check it here, along with a few other designs: goo.gl/unYc8a (not available currently)
You can also find some more designs here: goo.gl/U9gbn1
Or here: goo.gl/qUGv74
Or here: goo.gl/tu2xSk
And ready-made Taranis X9D Plus transmitters with all the bells and whistles here: goo.gl/LVDBzb
Handy list of accessories shown:
- Switch nuts: goo.gl/j4dTVS
- Gimbal sticks M3: goo.gl/8Ibupv
- Silicone switch sleeves: goo.gl/BN69JT
- Transmitter balancer: goo.gl/tEiEUF
- Transmitter stand: goo.gl/ztLv32
- Expandable braided cable sleeve: goo.gl/kGHSZq
- Adhesive heat shrink: goo.gl/Uov32z
- Gimbal protectors (various colors and sizes): goo.gl/7amm8E
- Silicone bottle holder (various colors): goo.gl/iWDRPd
- And of course the transmitter itself: goo.gl/xk5Zlz or goo.gl/vmtidg
For more details, you can check the 1st part of the Taranis mods series here:
• Taranis mods #1 - Cheap and Easy mods...
You can also check part 3, with the installation of the hall-effect sensor M9 Gimbals:
• Taranis mods #3 - Installing the FrSk...
Coming up next:
Hawk Creation CNC accessories: goo.gl/cByrl4
Backlight mod and more.. So stay tuned ;)
👍 PLEASE SUPPORT the MuteFPV channel:
-------
👍 Join my PATREON: mutefpv.com/patreon
👍 Tip my 'piggy bank' via PAYPAL: mutefpv.com/paypal
👍 Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: mutefpv.com/banggood
AMAZON (paid link): mutefpv.com/amazon
GETFPV: mutefpv.com/getfpv
EBAY: mutefpv.com/ebay
ALIEXPRESS: mutefpv.com/aliexpress
REELSTEADY: mutefpv.com/reelsteady
👍 THANK YOU in advance for your support!
(As an Amazon Associate I earn from qualifying purchases.)
-------------------------------
This video features the song "Magic" by @TONEZPRO, available under a Creative Commons License
Song link: soundcloud.com/tonez-pro/magic
Artist link: soundcloud.com/tonez-pro
Music provided by Audio Library • Video
CC-by license: creativecommons.org/licenses/by/3.0/
-------------------------------
#TaranisMods
#muteFPV
#FrSky
#FrSkyTaranis
8 سال پیش
در تاریخ 1396/01/10 منتشر شده
است.
16,293
بـار بازدید شده