Make Your 3D Prints Stick Better - 3 TIPS
687 بار بازدید -
6 سال پیش
-
▶Please consider supporting me:
▶Please consider supporting me: www.thehardwareguy.co.uk/membership
Getting 3D prints to stick properly is always tricky. What usually happens when you get your first 3D printer is that everything goes so smoothly, because it's all new and shiny. Then all of a sudden, 100+ hours into printing things suddenly start going wrong. Don't panic! This is completely normal. There is likely a very simple explanation, and I'm here to point you in the right direction. In this video I give you some tips that'll help you achieve a higher print success rate. You'll be back to a happy printer in no time.
#prusa #mk3 #3dprinting
----------------------------------------------------------------------------------------
Links from the video:
Blog version: www.thehardwareguy.co.uk/3d-prints-not-sticking-an…
▶Acetone:
UK: amzn.to/2lABk5N
US: amzn.to/2XeSurz
CA: amzn.to/2MB7oTY
----------------------------------------------------------------------------------------
My Links:
Website: www.thehardwareguy.co.uk/
Instagram: www.instagram.com/hardwareguy_
Twitter: www.twitter.com/hardwareguy_
Thingiverse: www.thingiverse.com/thehardwareguy
Github: github.com/theh4rdwareguy
DISCLAIMER: Some links in this video description may contain affiliate links. If you purchase a product via my affiliate product links, I’ll receive a small commission. This helps support the channel and allows me to continue to making good content.
6 سال پیش
در تاریخ 1397/12/04 منتشر شده
است.
687
بـار بازدید شده