Building a Drawer Box, One Take Unedited Woodworking
16.2 هزار بار بازدید -
8 ماه پیش
-
Design Plans:
Design Plans: https://jonpeters.com/design-plans/
Building a Drawer Box: One Take Unedited."
Using five-eighths Baltic birch plywood, the sides, front, and back of the drawer box are secured with 23-gauge pin nails and inch-and-a-quarter screws.
The drawer's base, made of half-inch plywood, slides into a groove, anchored by nails and additional screws. To prevent potential rattling, a practical touch of hot glue is added to the bottom.
This unedited video is an experiment in real-time woodworking, showcasing the time and patience required for the craft. Share your thoughts in the comments below. Thanks for watching! Jon
Instagram: Instagram: jonpeters_
Facebook: Facebook: 312021729836
Website: http://jonpeters.com/
#DIY, #woodworking,#homeimprovement
Building a Drawer Box: One Take Unedited."
Using five-eighths Baltic birch plywood, the sides, front, and back of the drawer box are secured with 23-gauge pin nails and inch-and-a-quarter screws.
The drawer's base, made of half-inch plywood, slides into a groove, anchored by nails and additional screws. To prevent potential rattling, a practical touch of hot glue is added to the bottom.
This unedited video is an experiment in real-time woodworking, showcasing the time and patience required for the craft. Share your thoughts in the comments below. Thanks for watching! Jon
Instagram: Instagram: jonpeters_
Facebook: Facebook: 312021729836
Website: http://jonpeters.com/
#DIY, #woodworking,#homeimprovement
8 ماه پیش
در تاریخ 1402/09/08 منتشر شده
است.
16,230
بـار بازدید شده