Triumph TR6 Triple SU - HS6 carbs. Ditched the webers.
23.1 هزار بار بازدید -
4 سال پیش
-
After a long frustrating year
After a long frustrating year and a half saga trying to get my Weber DCOE 40's working properly, I finally pulled the trigger on triple HU carbs from https://www.goodparts.com/product/man...
The simplicity of these carbs makes a world of difference to getting them dialed in and working.
When I first installed them and started them for the first time, the idle was super high but I could tell immediately that it was running smooth! After playing around with a few bits and bobs I finally got them to idle nicely at around 975 RPM according to my timing light that has a built in electronic tach.
I could not be happier! This is running really nice and I will eventually get these dialed in perfectly after the holidays. I just want to get a feel for them now.
So enjoy this video of a first drive in miserable cold Oregon weather. Microphone was placed near exhaust. If you hear any rattle, it's the license plate frame vibrating.
Here is what they look like Out with the Webers in with the tripl...
Having said all that, hers is the setup.
Replaced points and condenser with Petronix ignitor. $100.00
https://pertronixbrands.com/products/...
BP2700 Camshaft (Duration 270, Intake lift .410, exhaust .400)
https://www.bpnorthwest.com/camshaft-...
Valve lash .012 Intake, .014 Exhaust
Monza exhaust header
https://www.bpnorthwest.com/monza-exh...
Distributor Lucas 22D reworked by Jeff at http://advanceddistributors.com/wordp...
Timing 14 BTDC
As things mover forward, the weather gets better, I will fine tune these and post update.
The simplicity of these carbs makes a world of difference to getting them dialed in and working.
When I first installed them and started them for the first time, the idle was super high but I could tell immediately that it was running smooth! After playing around with a few bits and bobs I finally got them to idle nicely at around 975 RPM according to my timing light that has a built in electronic tach.
I could not be happier! This is running really nice and I will eventually get these dialed in perfectly after the holidays. I just want to get a feel for them now.
So enjoy this video of a first drive in miserable cold Oregon weather. Microphone was placed near exhaust. If you hear any rattle, it's the license plate frame vibrating.
Here is what they look like Out with the Webers in with the tripl...
Having said all that, hers is the setup.
Replaced points and condenser with Petronix ignitor. $100.00
https://pertronixbrands.com/products/...
BP2700 Camshaft (Duration 270, Intake lift .410, exhaust .400)
https://www.bpnorthwest.com/camshaft-...
Valve lash .012 Intake, .014 Exhaust
Monza exhaust header
https://www.bpnorthwest.com/monza-exh...
Distributor Lucas 22D reworked by Jeff at http://advanceddistributors.com/wordp...
Timing 14 BTDC
As things mover forward, the weather gets better, I will fine tune these and post update.
4 سال پیش
در تاریخ 1399/10/12 منتشر شده
است.
23,107
بـار بازدید شده