Vauxhall insignia rear discs and pads replacement
75.7 هزار بار بازدید -
5 سال پیش
-
Links in description for tools
Links in description for tools used, and links to buy stuff you need. please check fitment before purchasing.
Did the rear brakes on this insignia, pads where worn down to the metal. so fitted new discs and pads. In this video i show how to do each step. Also i show how to rewind the caliper piston the right way. I also show my face in this video for the first time so scary.
BELOW IS THE TOOLS NEEDED
(18mm) Spanner for the caliper bolts
(13mm) spanner for slider bolts
(11mm) spanner for bleed nipple
Hammer
Small screw driver
(T25) torxs bit this may be different on your vehicle could be allen key
Penetrating fluid / wd40 or similar
dot 4 brake fluid
clear tube for bleed nipple
New disc retaining screws
I haven't added torque specs due to it being different on different models so please have a check online please.
That is it, if you have any questions pop a comment on the video. I will help anyway i can thank you for reading this description.
Below is a few links to what i used, found as many as i could.
(Brake caliper rewind tool)
https://amzn.to/2ZS8Cgk
(Brake bleeding pipe)
https://amzn.to/2VCh0RT
(Dot 4 brake fluid)
https://amzn.to/2ZR4Bsr
(Torxs)
https://amzn.to/2Y4nUNs
(Copper grease)
https://amzn.to/2DJtP2y
(Disc retaining screws)
https://rover.ebay.com/rover/1/710-53...
(Rear discs and pads i used) PLEASE CHECK YOUR FITMENT)
https://rover.ebay.com/rover/1/710-53...
Did the rear brakes on this insignia, pads where worn down to the metal. so fitted new discs and pads. In this video i show how to do each step. Also i show how to rewind the caliper piston the right way. I also show my face in this video for the first time so scary.
BELOW IS THE TOOLS NEEDED
(18mm) Spanner for the caliper bolts
(13mm) spanner for slider bolts
(11mm) spanner for bleed nipple
Hammer
Small screw driver
(T25) torxs bit this may be different on your vehicle could be allen key
Penetrating fluid / wd40 or similar
dot 4 brake fluid
clear tube for bleed nipple
New disc retaining screws
I haven't added torque specs due to it being different on different models so please have a check online please.
That is it, if you have any questions pop a comment on the video. I will help anyway i can thank you for reading this description.
Below is a few links to what i used, found as many as i could.
(Brake caliper rewind tool)
https://amzn.to/2ZS8Cgk
(Brake bleeding pipe)
https://amzn.to/2VCh0RT
(Dot 4 brake fluid)
https://amzn.to/2ZR4Bsr
(Torxs)
https://amzn.to/2Y4nUNs
(Copper grease)
https://amzn.to/2DJtP2y
(Disc retaining screws)
https://rover.ebay.com/rover/1/710-53...
(Rear discs and pads i used) PLEASE CHECK YOUR FITMENT)
https://rover.ebay.com/rover/1/710-53...
5 سال پیش
در تاریخ 1398/02/08 منتشر شده
است.
75,756
بـار بازدید شده