BulletSpan example in Sketchware
939 بار بازدید -
4 سال پیش
-
This video shows how to
This video shows how to add Bullets to paragraphs in a TextView in Sketchware. It shows the use of BulletSpan.
A BulletSpan is constructed by writing
new BulletSpan(int gapWidth, int color, int bulletRadius);
BulletSpans must be attached from the first character to the last character of a single paragraph.
Codes used in above video available here:
https://www.sketchwarehelp.com/2020/0...
A BulletSpan is constructed by writing
new BulletSpan(int gapWidth, int color, int bulletRadius);
BulletSpans must be attached from the first character to the last character of a single paragraph.
Codes used in above video available here:
https://www.sketchwarehelp.com/2020/0...
4 سال پیش
در تاریخ 1398/12/17 منتشر شده
است.
939
بـار بازدید شده