How to perform Walnut Blasting in a BMW 335i 535i N54
10.7 هزار بار بازدید -
4 سال پیش
-
A step by step tutorial
A step by step tutorial on how to clean your valve by using the walnut blasting method. This process can vary depending on what car you perform it on. We are doing this on a 2011 BMW 335is with a few aftermarket modifications.
Video breakdown:
Intro (0:00)
Tools used (0:45)
Step 1 (2:02): Removing the bottom cover and fan
Step 2 (3:05): Disconnect hoses and wiring
Step 3 (5:23): Removing the fan.
Step 4 (6:29): Removing air filter
Step 5 (7:10): Disconnecting the vacuum line
Step 6 (7:36): Removing the charge pipe
Step 7 (7:53): Removing the engine cover
Step 8 (8:10): Disconnecting things around the engine
Step 9 (10:19) : Disconnecting the throttle body
Step 10 (11:10): Inspecting dirty valves
Step 11 (11:34): Closing valves
Step 12 (12:46): Setting up walnut blaster & vacuum
Step 13 (14:36): Blasting the valves
Step 14 (17:12): Inspecting cleaned valves
Step 15 (17:35): Cleaning & reinstalling the intake plenum
Step 16 (21:41): Cleaning and reinstalling the throttle body
Step 17 (22:27): Secure the purge valve hose
Step 18 (23:04): Reconnecting the wiring harness
Step 19 (23:36): Reconnecting the charge pipe
Step 20 (24:58): Reconnecting the fan
Step 21 (25:58): Reconnecting the fan relay
Step 22 (26:39): Reconnecting the upper expansion hose
Step 23 (27:23): Putting back bottom covers
Step 24 (27:55): Re-install air filters
Step 25 (28:40): Connect battery cables
Step 26 (29:16): Add engine cover
Step 27 (30:37): Testing for fault codes
Step 28 (31:05): Test drive
VOTE FOR US as Best of Las Vegas!
www.Votebolv.com/bmwonly/
Follow us or DM us any questions!
www.instagram.com/bmwonlylv/
We specialize in BMW and Rolls Royce's here in Las Vegas. From simple maintenance to conversions, we do it all.
bmwonlylv.com/
4 سال پیش
در تاریخ 1399/06/27 منتشر شده
است.
10,705
بـار بازدید شده