How to deploy the StarWind Virtual SAN storage appliance: Part 1
9 هزار بار بازدید -
4 سال پیش
-
Note: In later versions of
Note: In later versions of StarWind VSAN the default username and password is:
Username: user
Password: rds123RDS
In this how-to video, I will show you how to get the StarWind Virtual SAN (vSphere appliance) deployed and ready for use with VMware vSphere ESXi.
MTU (Maximum transmission unit): https://en.wikipedia.org/wiki/Maximum...
Contents
00:00 Introduction
01:30 Deploy StarWind OVF
05:32 Setup new networking for iSCSI
09:28 Configure the new StarWind VM settings
10:16 Configure the StarWind appliance
16:39 Download and install the StarWind Management console
17:57 Connect to StarWind VSA using the management console
Username: user
Password: rds123RDS
In this how-to video, I will show you how to get the StarWind Virtual SAN (vSphere appliance) deployed and ready for use with VMware vSphere ESXi.
MTU (Maximum transmission unit): https://en.wikipedia.org/wiki/Maximum...
Contents
00:00 Introduction
01:30 Deploy StarWind OVF
05:32 Setup new networking for iSCSI
09:28 Configure the new StarWind VM settings
10:16 Configure the StarWind appliance
16:39 Download and install the StarWind Management console
17:57 Connect to StarWind VSA using the management console
4 سال پیش
در تاریخ 1399/09/12 منتشر شده
است.
9,097
بـار بازدید شده