EMSEAL DSM Traffic Grade Watertight Expansion Joint
8.3 هزار بار بازدید -
5 سال پیش
-
EMSEAL's DSM System is the
EMSEAL's DSM System is the industry standard for watertight expansion joints used in parking garages, decks, walkways, stadiums and other horizontal areas with vehicular or pedestrian traffic. This quick overview shows the product and how easy it is to install. EMSEAL DSM System is the best solution to your new construction or retrofit repair horizontal expansion joint needs.
https://www.emseal.com/product/dsm-sy...
A watertight expansion joint, the DSM System is for horizontal-plane deck applications. Traffic durable, joint-face adhered and precompressed, DSM System is a primary seal for deck expansion joints. DSM’s toughness and resilience come from its microsphere-modified-acrylic impregnation and tensionless highway-grade silicone bellows coating.
The system is comprised of 1) pre-compressed, silicone-and-impregnated-foam hybrid; 2) field-applied epoxy adhesive on the joint faces; 3) a silicone sealant band that seals substrate voids and irregularities.
An unmatched performance record has established DSM System as a standard for parking deck and stadium expansion joint sealing. Unlike extruded rubber seals, ‘caulk-and-backer rod’ and other predecessor technologies, DSM does not suffer from compression-set nor does it rely on adhesion in tension for its performance. Highly configurable, the DSM System uniquely handles changes in plane and direction essential to ensuring continuity of seal.
Watertight—the system is installed just below the deck surface. This ensures watertightness is achieved at the deck surface not in gutters from which water must be managed.
Non-Invasive Anchoring—there are no hard metal-to-concrete connections in the system. This includes embedded pins, anchors, screws, bolts or tracks, trays or rails. The system is locked to the joint faces by means of the 1) backpressure of the foam, 2) the epoxy adhesive, and 3) the injected silicone sealant band at the joint face to foam and silicone bellows interface.
Continuity of Seal—as in all EMSEAL expansion joint systems, continuity of seal through changes in plane and direction is an essential performance differentiator. Details for watertight, field-fabricated transitions from deck to wall, at curbs, sidewalks, parapets, tees, and crosses are available with the DSM SYSTEM.
Aesthetics & Versatility—Standard color is gray (other colors available), uniform bellows appearance, double sealing, fuel resistance, and an enhanced ability to handle variations in joint size are among other system features.
Transitions and Terminations
https://www.emseal.com/product/univer...
Universal-90’s:
Universal-90’s (or U-90’s) are factory-made 90-degree transition pieces that ensure continuity-of-seal where expansion joints change plane.
Use of U-90’s eliminates the field work needed to make plane changes making overall installation fast and efficient.
Watertightness through the plane change is guaranteed–leaving nothing to chance in field-fabricating inside and outside transitions.
U-90 transitions are symmetrically coated on both faces allowing them to be installed as an inside corner or as an outside corner.
Straight-run sticks are joined in the field to the U-90’s.
U-90’s have a 12-inch (305mm) long leg and a 6-inch (152mm) vertical piece on each side of the elbow.
Custom-90’s:
Custom-90’s, are factory-fabricated inside and outside 90-degree transition pieces coated on just the weather-facing faces.
Custom-90’s are available when field conditions and measurements are known up front.
Custom-90’s are widely used in stadium tread and riser applications or other applications where numerous inside and outside 90-degree transitions are required. Consult EMSEAL.
https://www.emseal.com/product/dsm-sy...
A watertight expansion joint, the DSM System is for horizontal-plane deck applications. Traffic durable, joint-face adhered and precompressed, DSM System is a primary seal for deck expansion joints. DSM’s toughness and resilience come from its microsphere-modified-acrylic impregnation and tensionless highway-grade silicone bellows coating.
The system is comprised of 1) pre-compressed, silicone-and-impregnated-foam hybrid; 2) field-applied epoxy adhesive on the joint faces; 3) a silicone sealant band that seals substrate voids and irregularities.
An unmatched performance record has established DSM System as a standard for parking deck and stadium expansion joint sealing. Unlike extruded rubber seals, ‘caulk-and-backer rod’ and other predecessor technologies, DSM does not suffer from compression-set nor does it rely on adhesion in tension for its performance. Highly configurable, the DSM System uniquely handles changes in plane and direction essential to ensuring continuity of seal.
Watertight—the system is installed just below the deck surface. This ensures watertightness is achieved at the deck surface not in gutters from which water must be managed.
Non-Invasive Anchoring—there are no hard metal-to-concrete connections in the system. This includes embedded pins, anchors, screws, bolts or tracks, trays or rails. The system is locked to the joint faces by means of the 1) backpressure of the foam, 2) the epoxy adhesive, and 3) the injected silicone sealant band at the joint face to foam and silicone bellows interface.
Continuity of Seal—as in all EMSEAL expansion joint systems, continuity of seal through changes in plane and direction is an essential performance differentiator. Details for watertight, field-fabricated transitions from deck to wall, at curbs, sidewalks, parapets, tees, and crosses are available with the DSM SYSTEM.
Aesthetics & Versatility—Standard color is gray (other colors available), uniform bellows appearance, double sealing, fuel resistance, and an enhanced ability to handle variations in joint size are among other system features.
Transitions and Terminations
https://www.emseal.com/product/univer...
Universal-90’s:
Universal-90’s (or U-90’s) are factory-made 90-degree transition pieces that ensure continuity-of-seal where expansion joints change plane.
Use of U-90’s eliminates the field work needed to make plane changes making overall installation fast and efficient.
Watertightness through the plane change is guaranteed–leaving nothing to chance in field-fabricating inside and outside transitions.
U-90 transitions are symmetrically coated on both faces allowing them to be installed as an inside corner or as an outside corner.
Straight-run sticks are joined in the field to the U-90’s.
U-90’s have a 12-inch (305mm) long leg and a 6-inch (152mm) vertical piece on each side of the elbow.
Custom-90’s:
Custom-90’s, are factory-fabricated inside and outside 90-degree transition pieces coated on just the weather-facing faces.
Custom-90’s are available when field conditions and measurements are known up front.
Custom-90’s are widely used in stadium tread and riser applications or other applications where numerous inside and outside 90-degree transitions are required. Consult EMSEAL.
5 سال پیش
در تاریخ 1398/12/29 منتشر شده
است.
8,334
بـار بازدید شده