8 steps to GPS Position Hold for an FPV drone

The sexy 7-inch long-range FPV frame https://bit.ly/399eEil Support my work https://www.patreon.com/pawelspychalski You can upgrade you FPV drone with a GPS Position Hold in 8 steps. It’s really simple and requires you to only buy a good GPS module with magnetometer, use INAV and configure this and that. Probably the most important part is to correctly position the GPS and magnetometer. Too close to wires or motors and the magnetic field will influence the readout. Instead of holding position, drone would do “toilet bowling” and fly away. Matek M10 5883 GPS module http://bit.ly/3LuvXPB Beitian BN-880 GPS http://bit.ly/348jk3D Matek M8Q-5883 GPS https://bit.ly/3ZVtPEd INAV FPV drone from flash to flight https://www.seevid.ir/fa/w/s9w6J7cPnsA Betaflight to INAV | How to migrate your drone? https://www.seevid.ir/fa/w/1hhsqyXeKew Why INAV is not arming https://www.seevid.ir/fa/w/7MAdgGkBkXs https://www.seevid.ir/fa/w/a-pjXIXVkSU GPS Position Hold is cool https://www.seevid.ir/fa/w/a-pjXIXVkSU Get a GPS module https://www.seevid.ir/fa/w/a-pjXIXVkSU Where to install GPS on a drone? https://www.seevid.ir/fa/w/a-pjXIXVkSU GPS wiring https://www.seevid.ir/fa/w/a-pjXIXVkSU Betaflight will not do, get INAV https://www.seevid.ir/fa/w/a-pjXIXVkSU GPS and magnetometer configuration https://www.seevid.ir/fa/w/a-pjXIXVkSU Magnetometer orientation https://www.seevid.ir/fa/w/a-pjXIXVkSU Magnetometer calibration https://www.seevid.ir/fa/w/a-pjXIXVkSU Nav Position Hold flight mode https://www.seevid.ir/fa/w/a-pjXIXVkSU A few caveats

• #science_technology
• #quadmeup
• #pawe_spychalski