Multi-Dog Training Collar with Flashlight Unboxing and Review | 3 Modes; Shock, Vibrate, and Beep

DIYTechnician
DIYTechnician
628 بار بازدید - 9 ماه پیش - Buy me a coffee?
Buy me a coffee? https://www.buymeacoffee.com/diytechn... Buy me a coffee? https://www.buymeacoffee.com/diytechn... Dog Shock Collar-Obvious Training Effect, Dog Training Collar with Remote for Large Medium Small Dogs, Rechargeable E-Collar Waterproof Collars with Flashlight Beep Vibration and Shock Training Modes

https://amzn.to/3R0NOjn

About this awesome dog training collar:
DDZ dog training collar has 4 safe training modes, Flashlight, Beep, Vibrate (0-9) levels, and Static Shock (0-99) levels, to help correct your dog's barking, chewing, biting, chasing, jumping, digging, and other bad behaviors.
【Indoor & Outdoor Versatility】Training range up to 1600 feet. Plus, the dog training collar with remote has a 1+4 channel design and settings memory, meaning you can train four dogs at the same time to follow your commands and play happily in your backyard, park, beach, or anywhere else.【IPX7 Waterproof Collar & Adjustable Pet Collar Fits All Size Dogs】The IPX7 waterproof collar allows your dog to swim, shower, and play in the rain. The collar size is adjustable from 5 to 28 inches in length, suitable for all dogs from 15 to 150 pounds to wear comfortably.
The clear digital screen and large buttons with three different icons allow you to become proficient in operation in minutes. At the same time, the safety lock setting of the remote control helps prevent misuse and avoid unnecessary electric shock to your dog.
DDZ collar uses the latest lithium battery technology for longer battery life. In addition, a full charge takes only 2 hours, the receiver will last 30 days, while the remote battery will last more than 180 days.
Here's the video transcripts:
hi everybody today for an unboxing and review I've got this multi-dog training system here it's rechargeable and waterproof let's check this baby out right well here's everything that came in the Box got the collar of course this thing is to test the shock function on this which I'll show you goes on the terminals there and these are different covers and and uh connect connectors for different uh thicknesses of fur on your dog so the longer ones are for thicker fur smaller ones are for the smaller fur got the charger here and of course the remote as well as some directions okay now to uh activate the transmitter here the remote control uh we're going to go ahead and turn it on holding that button down there that was that top button there you can see it shows you how much battery life you have in there and it's uh currently locked which I'll show you how to take that off and operate this whole thing to turn on the uh turn on the dog collar here just go ahead and hold that button down go now it's on you know it's on because it's got a beeping blinking light right there see that okay now we're uh on the you can switch dogs here so this is your your toggle right there that top button and so you can you can operate off uh four of these collars so if you had four of these you could put one on each dog and operate each one on its own frequency but for now we're just going to go with dog a right there and then it'll allow you to adjust the volume um beep or the sound um the vibrate and then of course the shock function there and set the different levels of each one but to light up to light it up just press that button there that top one okay now to adjust the levels on your your collar there right is done right here on the right side right so it's got eight levels now if you want to switch dogs of course you can adjust this the settings for each one okay let's say you want to test the sound on it so you push that button there you go and you can bump that up too let's see how loud this thing will go all right a little bit louder that'll go up to nine now you can CH test the vibrate function this see that and you can adjust those levels too how much it vibrates the intensity of it press that button there and now I'll show you how to test the shock function and we'll take a couple of these and screw them on right there okay we got those on now you never want to leave it like that when it's on your dog you want to put those rubber covers on there and then to test the shock function you take this thing and you go ahead and actually what you can do these things there are for tightening cranking the cranking these down and tightening them up see how they fit right over that and you can turn uh tighten them and loosen them that way now to check the the shock function you're going to take and put this this thing right on top of it there see that now I'm going to press the shock right there and you know rather than put your hand on it or test it out on your dog you just push that button if that thing lights up the shock function's working see it that means it's working and then you can also adjust how much you know the shock level right there see that's the shock down there there we go so that's all three functions on it there's up or down for each setting
9 ماه پیش در تاریخ 1402/09/20 منتشر شده است.
628 بـار بازدید شده
... بیشتر