How to replace your Dyson Pure Hot + Cool Link purifier's filter
196.7 هزار بار بازدید -
4 سال پیش
-
Replacing your Dyson Pure Hot
Replacing your Dyson Pure Hot + Cool™ Link purifier fan's 360° Glass HEPA filter takes less than 60 seconds, as shown in our video guide. And this only needs to be done after 12 months when used for 12 hours a day.
The LED display on the base of the machine will show you when the filter needs to be changed. If you have chosen to receive filter life notifications from the Dyson Link app, these will also let you know when the filter needs replacing. If you have the Dyson Link app but have opted not to receive notifications, you will find this information within the app.
Step 1. Always switch 'OFF' and unplug before carrying out any maintenance.
Step 2. Press both catches on either side of the air amplifier at the same time and lift off the main body.
Step 3. Release the filter from the housing by pressing where indicated by the arrows. Dispose of the filter assembly only in a household waste bin.
Step 4. Carefully remove the new filter from any packaging.
Step 5. Locate the new filter inside the filter housing.
Step 6. Place the filter housing on the main body assembly. Push down ensuring it clicks into place.
Step 7. Open the sensor hatch on the side of the machine. Use a cotton swab to carefully clean inside.
Step 8. Refit the sensor hatch ensuring in clicks shut.
Step 9. When you have re-assembled your machine, plug the machine back in and press the standby ON/OFF button.
Step 10. Press and hold the standby ON/OFF button on the remote for 6 seconds.
Step 11. A clockwise-rotating loading pattern will be shown on the LED display.
Step 12. Once the loading pattern is complete, the machine will return to its normal usage.
Our experts are on hand to help, so leave us a comment if you'd like some further advice.
The LED display on the base of the machine will show you when the filter needs to be changed. If you have chosen to receive filter life notifications from the Dyson Link app, these will also let you know when the filter needs replacing. If you have the Dyson Link app but have opted not to receive notifications, you will find this information within the app.
Step 1. Always switch 'OFF' and unplug before carrying out any maintenance.
Step 2. Press both catches on either side of the air amplifier at the same time and lift off the main body.
Step 3. Release the filter from the housing by pressing where indicated by the arrows. Dispose of the filter assembly only in a household waste bin.
Step 4. Carefully remove the new filter from any packaging.
Step 5. Locate the new filter inside the filter housing.
Step 6. Place the filter housing on the main body assembly. Push down ensuring it clicks into place.
Step 7. Open the sensor hatch on the side of the machine. Use a cotton swab to carefully clean inside.
Step 8. Refit the sensor hatch ensuring in clicks shut.
Step 9. When you have re-assembled your machine, plug the machine back in and press the standby ON/OFF button.
Step 10. Press and hold the standby ON/OFF button on the remote for 6 seconds.
Step 11. A clockwise-rotating loading pattern will be shown on the LED display.
Step 12. Once the loading pattern is complete, the machine will return to its normal usage.
Our experts are on hand to help, so leave us a comment if you'd like some further advice.
4 سال پیش
در تاریخ 1399/01/29 منتشر شده
است.
196,752
بـار بازدید شده