Remove & Replace a Graber or Bali Cellular Honeycomb Shade
977.7 هزار بار بازدید -
11 سال پیش
-
Buy brackets:
Buy brackets: https://bit.ly/32EdUyD
This video will take you through the steps to remove and replace your Graber or Bali Cellular Honeycomb Shade.
00:00:00 Intro
00:00:11 Tools Needed
00:00:16 Removing Shade from Metal Brackets
00:00:31 Removing Shade from Clear Plastic Brackets
00:00:44 Install Shade
Things you will need for the repair:
• Flat-Head Screwdriver
Instructions:
1. Place a flat screwdriver between the clip at the rear of the bracket and the back of the headrail. Once all of the brackets are released, the shade should come out toward you. If your bracket is clear plastic, you will need to push the tab up on the back of the bracket while pulling the shade forward.
2. To replace the shade, slide the top -- front portion onto the bracket first.
Make sure the front tab of the bracket is seated in the slot at the front of the headrail.
3. Then rotate the back of the shade until you hear it click into place.
For information on blind parts, string and instruction - visit www.fixmyblinds.com
To like us on Facebook: Facebook: fixmyblinds
For Window Covering Safety Tips, click the link below:
http://www.windowcoverings.org
Visit our channel: fixmyblinds
Video ID: 181028
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Copyright © Fix My Blinds Inc 2021 and Subsequent Years All rights reserved.
This video will take you through the steps to remove and replace your Graber or Bali Cellular Honeycomb Shade.
00:00:00 Intro
00:00:11 Tools Needed
00:00:16 Removing Shade from Metal Brackets
00:00:31 Removing Shade from Clear Plastic Brackets
00:00:44 Install Shade
Things you will need for the repair:
• Flat-Head Screwdriver
Instructions:
1. Place a flat screwdriver between the clip at the rear of the bracket and the back of the headrail. Once all of the brackets are released, the shade should come out toward you. If your bracket is clear plastic, you will need to push the tab up on the back of the bracket while pulling the shade forward.
2. To replace the shade, slide the top -- front portion onto the bracket first.
Make sure the front tab of the bracket is seated in the slot at the front of the headrail.
3. Then rotate the back of the shade until you hear it click into place.
For information on blind parts, string and instruction - visit www.fixmyblinds.com
To like us on Facebook: Facebook: fixmyblinds
For Window Covering Safety Tips, click the link below:
http://www.windowcoverings.org
Visit our channel: fixmyblinds
Video ID: 181028
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Copyright © Fix My Blinds Inc 2021 and Subsequent Years All rights reserved.
11 سال پیش
در تاریخ 1392/01/06 منتشر شده
است.
977,796
بـار بازدید شده