Making ROCKET Engine Fuel Injectors - FINAL STEPS!
48.6 هزار بار بازدید -
4 سال پیش
-
Our rockets are 100% crowdfunded.
Our rockets are 100% crowdfunded. Visit http://www.copsub.com/support-us to become one of our supporters!
Compliment us by wearing our apparel: https://www.zazzle.com/store/copsub
Book a visit for our rocket factory in Copenhagen: https://www.airbnb.com/copsub
Copenhagen Suborbitals is the world's only crewed, crowdfunded space program. In the future, a volunteer astronaut will fly to space on our home-built rocket. We do this on our spare time, all the donations go to paying our workshop rent and buying materials. We are forever thankful to each of our supporters!
In today's episode, we'll be brazing our stainless steel, 3D printed coaxial swirl injectors for our BPM-5 liquid rocket engines. Besides that, we will guide you through our updated quality assurance measures to reduce our chances of seeing engine-rich combustion in our upcoming static fire tests.
Twitter : Twitter: CopSub
Facebook : Facebook: CopenhagenSuborbitals
Instagram : Instagram: copsub
LinkedIn : LinkedIn: copenhagen-suborbitals
Pinterest : Pinterest: copsub
Music by Everyday Astronaut:
(https://www.everydayastronaut.com)
TIMESTAMPS:
00:00 - Intro
00:21 - Engine-Rich Exhaust
00:29 - The 1st Coaxial Swirl Injector Ready for Oven Brazing
01:37 - Fuel / LOX-rich Injector Regions
02:15 - Final Injector Preparations
02:41 - The BIG Moment - Vacuum Oven
03:29 - Upgraded and Automated Flow-mapping Process
04:30 - Engine-rich Exhaust and Trying to Avoid It
06:52 - Rundown of the Upgraded Water Flow Test Stand
09:18 - Outro
Compliment us by wearing our apparel: https://www.zazzle.com/store/copsub
Book a visit for our rocket factory in Copenhagen: https://www.airbnb.com/copsub
Copenhagen Suborbitals is the world's only crewed, crowdfunded space program. In the future, a volunteer astronaut will fly to space on our home-built rocket. We do this on our spare time, all the donations go to paying our workshop rent and buying materials. We are forever thankful to each of our supporters!
In today's episode, we'll be brazing our stainless steel, 3D printed coaxial swirl injectors for our BPM-5 liquid rocket engines. Besides that, we will guide you through our updated quality assurance measures to reduce our chances of seeing engine-rich combustion in our upcoming static fire tests.
Twitter : Twitter: CopSub
Facebook : Facebook: CopenhagenSuborbitals
Instagram : Instagram: copsub
LinkedIn : LinkedIn: copenhagen-suborbitals
Pinterest : Pinterest: copsub
Music by Everyday Astronaut:
(https://www.everydayastronaut.com)
TIMESTAMPS:
00:00 - Intro
00:21 - Engine-Rich Exhaust
00:29 - The 1st Coaxial Swirl Injector Ready for Oven Brazing
01:37 - Fuel / LOX-rich Injector Regions
02:15 - Final Injector Preparations
02:41 - The BIG Moment - Vacuum Oven
03:29 - Upgraded and Automated Flow-mapping Process
04:30 - Engine-rich Exhaust and Trying to Avoid It
06:52 - Rundown of the Upgraded Water Flow Test Stand
09:18 - Outro
4 سال پیش
در تاریخ 1399/11/26 منتشر شده
است.
48,668
بـار بازدید شده