🔥 Cómo Instalar PANEL LED en techos de PLADUR 👉 3 IDEAS (AliExpress)
75 هزار بار بازدید -
2 سال پیش
-
🔥 How to Cover PIPE
🔥 How to Cover PIPE with PLADUR 👉 Stair Shelves ▼
🔥 Cómo Tapar TUBERÍA con PLADUR 👉 Est...
In this video you will see how to install a led panel on a plasterboard ceiling.
I will show you 3 different ideas so you can use the one you like the most.
😘Do you like the articles in my video? Here you have them:
✔Aigostar 18W Smart Led Ceiling Light: https://bit.ly/3CvNdgI
✔Aigostar 32W WiFi Smart LED Panel: https://bit.ly/3HYu8op
✔Aigostar WiFi Smart LED Candle Bulb C37， 7W: https://bit.ly/3KwD2Ly
😜 And if you are new, here are special discount codes:
Discount code: YHKOL4
€4 discount for a minimum purchase of €5
For new users
Valid until 3/31/2022
About this product: LED PANEL
▶︎App & voice control 👉
Through the free AigoSmart App you can easily control and configure the lighting in any room. Fully compatible with Alexa and Google Home, you can easily control the panels just by using your voice or by setting different environments in the App.
▶︎Energy saving 👉
With a consumption of only 32W, the panel has a light output of 3,200 lumens, and has a useful life of 50,000 hours, which represents great savings in replacement costs as well as energy since it consumes up to 85% less than traditional ones.
▶︎Easy installation 👉
The LED panel is designed to be embedded in different types of ceilings from plaster ceilings to false ceilings or grid ceilings, it can also be suspended with the appropriate suspension kit to obtain different lighting and decorative effects.
▶︎Dimmable lighting 👉
CCT technology allows you to modify the light tone from a switch, or you can configure it from the App. It also allows you to select the color tone, from a warm light of 3000 Kelvin to a totally cold white light of 6500 Kelvin, you can also configure the brightness you prefer from 10% to 100% to create all kinds of environments.
Video transcript:
Very good!
Today we will see 3 ideas to place a led panel on a plasterboard ceiling.
Let's go with the first idea.
We measure to put the panel parallel to the wall.
We need 4 squads.
With a piece of drywall we mark the thickness.
We passed the grinder through the mark we made to be able to better bend the square.
On this side we cut the curve so that later it does not bother us.
Now we unscrew the screw, place the square and screw again.
The brackets must go on the opposite sides to where the cable comes out of the panel.
Now we push the panel to the ceiling and line it up with the marks we made earlier.
We mark the contour of the part of the square that touches us on the ceiling.
With a handsaw we cut through the marks so that we have an L left.
We make an opening for the cable area.
Now we connect the wires with a tab.
We place the panel so that the brackets enter the holes we made and move it to where we made the openings.
Ready our panel to work.
And if you need to remove it, it's very simple. You just scroll and go.
We continue, idea 2.
We bring the panel to the ceiling and align it with the marks so that it is parallel to the wall.
We mark the contour.
Now we cut on the side of a outside the mark to gain a few millimeters.
We cut the profile.
We take an aluminum T.
We place it on one of the sides so that it passes to each side of the hole about 2 cm and we mark the distance of the hole.
We cut it and make 4 equals.
We drill in the fin so that later, when fixing it, the screw does not bother.
Now we place one on one side and, with the help of another, we mark to be able to make the miters.
We place it and check that it fits us well on the site.
We do the same with the following.
So that they are well fixed, we place a thin L in the area where we are going to screw.
Having cut the ceiling profile, we will have to reinforce it by placing two anchors to the slab.
Now we connect the cables and place it.
Ready our led panel to work.
Let's go with the third idea.
In this case we have the hole that we made before reinforced.
We cut some pieces of lifeguard tape and stick them with paste.
We measure so that the hole fits us well with the measurement of the panel.
We check with the panel if it fits or if we have to move some lifeguards.
We give him a hand of pasta.
Now we make some brackets to screw them to the panel so that it stays in place.
We connect the wires and place it.
Hashtag: #AliExpress #AliExpressSuperhaul #AliExpressHome
🔥 Cómo Tapar TUBERÍA con PLADUR 👉 Est...
In this video you will see how to install a led panel on a plasterboard ceiling.
I will show you 3 different ideas so you can use the one you like the most.
😘Do you like the articles in my video? Here you have them:
✔Aigostar 18W Smart Led Ceiling Light: https://bit.ly/3CvNdgI
✔Aigostar 32W WiFi Smart LED Panel: https://bit.ly/3HYu8op
✔Aigostar WiFi Smart LED Candle Bulb C37， 7W: https://bit.ly/3KwD2Ly
😜 And if you are new, here are special discount codes:
Discount code: YHKOL4
€4 discount for a minimum purchase of €5
For new users
Valid until 3/31/2022
About this product: LED PANEL
▶︎App & voice control 👉
Through the free AigoSmart App you can easily control and configure the lighting in any room. Fully compatible with Alexa and Google Home, you can easily control the panels just by using your voice or by setting different environments in the App.
▶︎Energy saving 👉
With a consumption of only 32W, the panel has a light output of 3,200 lumens, and has a useful life of 50,000 hours, which represents great savings in replacement costs as well as energy since it consumes up to 85% less than traditional ones.
▶︎Easy installation 👉
The LED panel is designed to be embedded in different types of ceilings from plaster ceilings to false ceilings or grid ceilings, it can also be suspended with the appropriate suspension kit to obtain different lighting and decorative effects.
▶︎Dimmable lighting 👉
CCT technology allows you to modify the light tone from a switch, or you can configure it from the App. It also allows you to select the color tone, from a warm light of 3000 Kelvin to a totally cold white light of 6500 Kelvin, you can also configure the brightness you prefer from 10% to 100% to create all kinds of environments.
Video transcript:
Very good!
Today we will see 3 ideas to place a led panel on a plasterboard ceiling.
Let's go with the first idea.
We measure to put the panel parallel to the wall.
We need 4 squads.
With a piece of drywall we mark the thickness.
We passed the grinder through the mark we made to be able to better bend the square.
On this side we cut the curve so that later it does not bother us.
Now we unscrew the screw, place the square and screw again.
The brackets must go on the opposite sides to where the cable comes out of the panel.
Now we push the panel to the ceiling and line it up with the marks we made earlier.
We mark the contour of the part of the square that touches us on the ceiling.
With a handsaw we cut through the marks so that we have an L left.
We make an opening for the cable area.
Now we connect the wires with a tab.
We place the panel so that the brackets enter the holes we made and move it to where we made the openings.
Ready our panel to work.
And if you need to remove it, it's very simple. You just scroll and go.
We continue, idea 2.
We bring the panel to the ceiling and align it with the marks so that it is parallel to the wall.
We mark the contour.
Now we cut on the side of a outside the mark to gain a few millimeters.
We cut the profile.
We take an aluminum T.
We place it on one of the sides so that it passes to each side of the hole about 2 cm and we mark the distance of the hole.
We cut it and make 4 equals.
We drill in the fin so that later, when fixing it, the screw does not bother.
Now we place one on one side and, with the help of another, we mark to be able to make the miters.
We place it and check that it fits us well on the site.
We do the same with the following.
So that they are well fixed, we place a thin L in the area where we are going to screw.
Having cut the ceiling profile, we will have to reinforce it by placing two anchors to the slab.
Now we connect the cables and place it.
Ready our led panel to work.
Let's go with the third idea.
In this case we have the hole that we made before reinforced.
We cut some pieces of lifeguard tape and stick them with paste.
We measure so that the hole fits us well with the measurement of the panel.
We check with the panel if it fits or if we have to move some lifeguards.
We give him a hand of pasta.
Now we make some brackets to screw them to the panel so that it stays in place.
We connect the wires and place it.
Hashtag: #AliExpress #AliExpressSuperhaul #AliExpressHome
2 سال پیش
در تاریخ 1400/12/20 منتشر شده
است.
75,071
بـار بازدید شده