How to measure dry film thickness, adhesion & hardness of coatings with the BYK-Gardner byko-cut
5.4 هزار بار بازدید -
11 سال پیش
-
The byko-cut universal enables the
The byko-cut universal enables the measurement of dry film thickness, adhesive strength and hardness with only one device.
Learn more: https://www.byk-instruments.com/en/Ph...
_____________________________________________________
How to measure the dry film thickness with the byko-cut?
- Draw a black line perpendicular to the cutting direction -- 0:24
- Select the correct cutting tool by rotating the blade holder -- 0:33
- Apply enough pressure to cut through the paint layer to the substrate -- 0:39
- Turn on the LED light to illuminate the surface -- 0:51
- Locate the cut line through the microscope -- 0:59
- Analysis -- 1:11
Align the scale to measure the paint layers
Count the number of lines for each coating layer
Calculate the coating thickness using the conversion table in the instruction manual
_____________________________________________________
How to test the hardness with the byko-cut? -- 1:39
- Draw a black line to mark the measuring position -- 1:40
- Select the correct cutting tool by rotating the blade holder -- 1:47
- Place the byko-cut with attachment weight on the measuring position -- 1:52
- Leave the device in this position for 30 sec -- 2:02
- Turn on the LED light to illuminate the surface -- 2:22
- Locate the cut line through the microscope -- 2:26
- Evaluation -- 2:32
Measure the indentation length with the built-in microscope.
_____________________________________________________
How to measure the bond strength with the byko-cut? -- 2:45
- Select the correct cutting tool by rotating the blade holder -- 2:48
- Create a grid pattern in the film by cutting on the substrate -- 2:53
- Brush 5 times in diagonal directions -- 3:21
- For certain substrates, the additional use of a tape is recommended -- 3:28
- Turn on the LED light to illuminate the surface -- 3:33
- Examine the grid surface with the microscope -- 3:40
- Evaluation -- 3:50
Classify the bond strength results according to the criteria of the ISO 2409 or ASTM 3359 standard.
Learn more: https://www.byk-instruments.com/en/Ph...
_____________________________________________________
How to measure the dry film thickness with the byko-cut?
- Draw a black line perpendicular to the cutting direction -- 0:24
- Select the correct cutting tool by rotating the blade holder -- 0:33
- Apply enough pressure to cut through the paint layer to the substrate -- 0:39
- Turn on the LED light to illuminate the surface -- 0:51
- Locate the cut line through the microscope -- 0:59
- Analysis -- 1:11
Align the scale to measure the paint layers
Count the number of lines for each coating layer
Calculate the coating thickness using the conversion table in the instruction manual
_____________________________________________________
How to test the hardness with the byko-cut? -- 1:39
- Draw a black line to mark the measuring position -- 1:40
- Select the correct cutting tool by rotating the blade holder -- 1:47
- Place the byko-cut with attachment weight on the measuring position -- 1:52
- Leave the device in this position for 30 sec -- 2:02
- Turn on the LED light to illuminate the surface -- 2:22
- Locate the cut line through the microscope -- 2:26
- Evaluation -- 2:32
Measure the indentation length with the built-in microscope.
_____________________________________________________
How to measure the bond strength with the byko-cut? -- 2:45
- Select the correct cutting tool by rotating the blade holder -- 2:48
- Create a grid pattern in the film by cutting on the substrate -- 2:53
- Brush 5 times in diagonal directions -- 3:21
- For certain substrates, the additional use of a tape is recommended -- 3:28
- Turn on the LED light to illuminate the surface -- 3:33
- Examine the grid surface with the microscope -- 3:40
- Evaluation -- 3:50
Classify the bond strength results according to the criteria of the ISO 2409 or ASTM 3359 standard.
11 سال پیش
در تاریخ 1392/06/15 منتشر شده
است.
5,458
بـار بازدید شده