Installing Interior Door in Less Than 5 MINUTES: The EASIEST and FASTEST Way, Professional Quality!
127.8 هزار بار بازدید -
4 سال پیش
-
Thanks for checking in! In
Thanks for checking in! In this video I will install a pre-hung door, BUT…. Im going to TIME myself! Maybe this can be the fastest install ever recorded! LOL Not only installing the door, but also casing the door as well ready for paint…Can YOU beat me?
00:00 | Intro, SET A RECORD TIME?
01:04 | TIME STARTS
06:03 | TIME STOPS, THANK YOU, SUB PLEASE
*******PLEASE NOTE*******
I am a professional at using these tools. Please use the proper safety equipment for each tool and refer to the manual for operating instructions!
TOOLS USED:
OCCIDENTAL LEATHER Tool Bag - https://amzn.to/3q8YBJy
TAPE MEASURE SUSPENDERS - https://amzn.to/30GwjgO
STANLEY 25ft. FatMax Tape Measure - https://amzn.to/3yHzqSi
DEWALT 12-inch Miter Saw - https://amzn.to/3J6FnwL
DEWALT Miter Saw Stand - https://amzn.to/3sk2gXC
METABO 16Ga Finish Nailer - https://amzn.to/3e9dFkJ
METABO 18Ga Finish Nailer - https://amzn.to/3J715RA
STABILA Levels 6pc. w/ Nylon Case - https://amzn.to/32fIBNB
PORTER CABLE Air Compressor - https://amzn.to/30HKF0x
METABO Air Hose 100ft. 1/4”- https://amzn.to/3qcmgcc
WOOD SHIMS - https://amzn.to/3yFOjEy
TITEBOND Wood Glue - https://amzn.to/3yGiyLH
For the first time ever I TIME myself on what it takes to install a pre-hung door from start to finish. 4 minutes and 54 seconds! YEA DO IT!!! I will have a video coming out soon describing each step I take to install a pre-hung door. Each door and door opening are a little different so I will go into better detail what's going through my head!
When measuring your casing remember to add 3/16” to your casing legs and 3/8” to the casing header. That way you will have a nice reveal around the door jamb. I my case I cut 45 degree miters with my Dewalt Chop Saw, but depending on the style of your casing, you might cut it straight or 0 degree on the saw.
When measuring the RO (rough opening, stud to stud) for your door you will need 2 inches of room for the door jamb and shims. SO MAKE SURE you are buying a door 2 inches SMALLER in width from your door opening.
Not all framing is plumb or level in every home, so do your best to keep the bubble in the lines of your level when installing a door. Does a door in your home “ghost” (open on its own)? Most likely the hinge side of the door is out of plumb or level.
Special Thanks:
Thanks Bryan for taking the time to help and plan how to shoot the video! Also thanks for keeping us motivated and moving towards our futures!
Youtube Copyright Free Music
00:00 | Intro, SET A RECORD TIME?
01:04 | TIME STARTS
06:03 | TIME STOPS, THANK YOU, SUB PLEASE
*******PLEASE NOTE*******
I am a professional at using these tools. Please use the proper safety equipment for each tool and refer to the manual for operating instructions!
TOOLS USED:
OCCIDENTAL LEATHER Tool Bag - https://amzn.to/3q8YBJy
TAPE MEASURE SUSPENDERS - https://amzn.to/30GwjgO
STANLEY 25ft. FatMax Tape Measure - https://amzn.to/3yHzqSi
DEWALT 12-inch Miter Saw - https://amzn.to/3J6FnwL
DEWALT Miter Saw Stand - https://amzn.to/3sk2gXC
METABO 16Ga Finish Nailer - https://amzn.to/3e9dFkJ
METABO 18Ga Finish Nailer - https://amzn.to/3J715RA
STABILA Levels 6pc. w/ Nylon Case - https://amzn.to/32fIBNB
PORTER CABLE Air Compressor - https://amzn.to/30HKF0x
METABO Air Hose 100ft. 1/4”- https://amzn.to/3qcmgcc
WOOD SHIMS - https://amzn.to/3yFOjEy
TITEBOND Wood Glue - https://amzn.to/3yGiyLH
For the first time ever I TIME myself on what it takes to install a pre-hung door from start to finish. 4 minutes and 54 seconds! YEA DO IT!!! I will have a video coming out soon describing each step I take to install a pre-hung door. Each door and door opening are a little different so I will go into better detail what's going through my head!
When measuring your casing remember to add 3/16” to your casing legs and 3/8” to the casing header. That way you will have a nice reveal around the door jamb. I my case I cut 45 degree miters with my Dewalt Chop Saw, but depending on the style of your casing, you might cut it straight or 0 degree on the saw.
When measuring the RO (rough opening, stud to stud) for your door you will need 2 inches of room for the door jamb and shims. SO MAKE SURE you are buying a door 2 inches SMALLER in width from your door opening.
Not all framing is plumb or level in every home, so do your best to keep the bubble in the lines of your level when installing a door. Does a door in your home “ghost” (open on its own)? Most likely the hinge side of the door is out of plumb or level.
Special Thanks:
Thanks Bryan for taking the time to help and plan how to shoot the video! Also thanks for keeping us motivated and moving towards our futures!
Youtube Copyright Free Music
4 سال پیش
در تاریخ 1399/09/03 منتشر شده
است.
127,881
بـار بازدید شده