HOW TO INSTALL COILOVER SUSPENSION!
385 هزار بار بازدید -
9 سال پیش
-
Installing Coilover Suspension in our
Installing Coilover Suspension in our Mazdaspeed 3! Join our Community of DIY'ers: http://www.youtube.com/user/everythin... Follow us on Facebook for More DIY Goodness: Facebook: e.doityourself
Follow us on Twitter! Twitter: everything_diy
Check out our Pictures on Instagram! Instagram: e_diy
This install procedure is a good guide for most Mazda, Ford and Volvo vehicles- as their suspension design and components are very similar. This guide will also be a valuable resource for most people looking to upgrade to coilovers, as the MacPherson front strut/shock and spring rears setup are very common.
Related Videos:
Sway Bar Install - HOW TO UPGRADE A REAR SWAY BAR!
Camber Arms Install - INSTALLING REAR CAMBER KIT!
End Links Install - REPLACING REAR SWAY BAR END LINKS!
At Home Alignment – Coming soon!
Parts:
- Mazdaspeed Performance Coilover Kit (Part # RAMS-8M-L10)
** These are equivalent to KW V3’s
Tools Used:
- Torque Wrench
- Large Washer
- Flat Head Screw Driver
- Ratchet
- 12mm, 14mm, 17mm, 20mm Sockets
- 8mm, 14mm, 17mm, 19mm Wrenches
- Adjustable Wrench
- 3/8 Extension
- Rubber Mallet
- Spring Compressors
- Hex Keys
- Jack
- Jack-stands
- 18x2x4 Piece of Wood
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
*SAFETY FIRST EVERY TIME*
Follow us on Twitter! Twitter: everything_diy
Check out our Pictures on Instagram! Instagram: e_diy
This install procedure is a good guide for most Mazda, Ford and Volvo vehicles- as their suspension design and components are very similar. This guide will also be a valuable resource for most people looking to upgrade to coilovers, as the MacPherson front strut/shock and spring rears setup are very common.
Related Videos:
Sway Bar Install - HOW TO UPGRADE A REAR SWAY BAR!
Camber Arms Install - INSTALLING REAR CAMBER KIT!
End Links Install - REPLACING REAR SWAY BAR END LINKS!
At Home Alignment – Coming soon!
Parts:
- Mazdaspeed Performance Coilover Kit (Part # RAMS-8M-L10)
** These are equivalent to KW V3’s
Tools Used:
- Torque Wrench
- Large Washer
- Flat Head Screw Driver
- Ratchet
- 12mm, 14mm, 17mm, 20mm Sockets
- 8mm, 14mm, 17mm, 19mm Wrenches
- Adjustable Wrench
- 3/8 Extension
- Rubber Mallet
- Spring Compressors
- Hex Keys
- Jack
- Jack-stands
- 18x2x4 Piece of Wood
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
*SAFETY FIRST EVERY TIME*
9 سال پیش
در تاریخ 1394/03/07 منتشر شده
است.
385,026
بـار بازدید شده