Fuel Line | Classic Tube | 1965-1966 Mustang
113.8 هزار بار بازدید -
11 سال پیش
-
Bill shows you how to
Bill shows you how to install a Classic Tube 3/8" Original Steel Fuel Tank to Fuel Pump Line on your 1965-1966 Mustang with a V8 Engine.
Purchase Product Here:
https://www.cjponyparts.com/classic-t...
The next step in our Forgotten Fastback project car is to install the Fuel Line, which will go from the tank to the pump mounts. This 3/8-inch line is originally found on the Shelby models, and will help when we plan on adding some decent horsepower to the Fastback.
To begin this installation on your 1965-1966 Mustang with a V8 Engine, remove the driver's side tire to allow for more room and then locate the route your Fuel Line will take on the underside of your Mustang. Install the grommet, begin straightening out your Fuel Line, and secure the one end to the grommet. Follow Bill's step-by-step instructions in the video to learn how to secure and straighten your entire Fuel Line.
We've also decided to install a Brake Line in the Mustang, since it shares many of the same mounting points with the Fuel Line. To run the break line, make sure the end with the 90-degrees is facing the master cylinder. Follow the instructions in the video to learn how to properly run this Line and finish up your installation of the Fuel Line.
Check out more Fuel Line parts from CJ's here:
http://www.cjponyparts.com/mustang-fu...
Check out more Classic Tube parts from CJ's here:
http://www.cjponyparts.com/classic-tu...
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_c...
Purchase Product Here:
https://www.cjponyparts.com/classic-t...
The next step in our Forgotten Fastback project car is to install the Fuel Line, which will go from the tank to the pump mounts. This 3/8-inch line is originally found on the Shelby models, and will help when we plan on adding some decent horsepower to the Fastback.
To begin this installation on your 1965-1966 Mustang with a V8 Engine, remove the driver's side tire to allow for more room and then locate the route your Fuel Line will take on the underside of your Mustang. Install the grommet, begin straightening out your Fuel Line, and secure the one end to the grommet. Follow Bill's step-by-step instructions in the video to learn how to secure and straighten your entire Fuel Line.
We've also decided to install a Brake Line in the Mustang, since it shares many of the same mounting points with the Fuel Line. To run the break line, make sure the end with the 90-degrees is facing the master cylinder. Follow the instructions in the video to learn how to properly run this Line and finish up your installation of the Fuel Line.
Check out more Fuel Line parts from CJ's here:
http://www.cjponyparts.com/mustang-fu...
Check out more Classic Tube parts from CJ's here:
http://www.cjponyparts.com/classic-tu...
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_c...
11 سال پیش
در تاریخ 1392/05/03 منتشر شده
است.
113,898
بـار بازدید شده