Xiaomi Mi 6 - Замена Аккумулятора Разборка
0 بار بازدید -
4 سال پیش
-
🔥 SUPPORT THE CHANNEL !!!
🔥 SUPPORT THE CHANNEL !!! SUBSCRIBE AND LIKE 🔥
This video shows how to replace the battery on Xiaomi Mi 6. We warm the back cover of the smartphone, on a hair dryer 180 degrees. We pry off the lid and with plastic we go around, while warming up the lid. We unscrew the screws on the motherboard, remove the protection, disconnect the battery, and unscrew the speaker at the bottom of the smartphone.
At the bottom of the battery there are 2 tabs (this is double-sided tape), you need to pull it to get the tape out from under the battery (pull slowly and carefully), you can warm up the smartphone a little to make it easier to pull it out.
Before gluing the battery, you need to check it, connect the battery and turn on the smartphone and also connect it to the charger.
If everything works, glue the double-sided tape (red double-sided tape 2mm) and glue the battery, and connect it to the motherboard. We fasten the protection and the lower speaker, clean a little old scotch tape, if there are irregularities, apply b7000 or t7000 glue, and glue the back case cover, you can press it with clothespins or rubber bands for a couple of hours.
0:00 - Start
0:20 - Warm up the device
2:40 - Unscrew the screws
3:30 - Removing the battery
5:18 - We glue a new battery
7:50 - Assembling the device
Реквизиты на которые вы можете перевести помощь, поддержку, благодарность и на развитие канала
ДОНАТ -- DONATE
https://streamlabs.com/vgeni4kadisass...
https://www.donationalerts.com/r/evge...
ВЕБМАНИ / webmoney
Z299720621617 Сша доллар
E513530553569 Европа евро
#Xiaomi #Mi6 #replacement
This video shows how to replace the battery on Xiaomi Mi 6. We warm the back cover of the smartphone, on a hair dryer 180 degrees. We pry off the lid and with plastic we go around, while warming up the lid. We unscrew the screws on the motherboard, remove the protection, disconnect the battery, and unscrew the speaker at the bottom of the smartphone.
At the bottom of the battery there are 2 tabs (this is double-sided tape), you need to pull it to get the tape out from under the battery (pull slowly and carefully), you can warm up the smartphone a little to make it easier to pull it out.
Before gluing the battery, you need to check it, connect the battery and turn on the smartphone and also connect it to the charger.
If everything works, glue the double-sided tape (red double-sided tape 2mm) and glue the battery, and connect it to the motherboard. We fasten the protection and the lower speaker, clean a little old scotch tape, if there are irregularities, apply b7000 or t7000 glue, and glue the back case cover, you can press it with clothespins or rubber bands for a couple of hours.
0:00 - Start
0:20 - Warm up the device
2:40 - Unscrew the screws
3:30 - Removing the battery
5:18 - We glue a new battery
7:50 - Assembling the device
Реквизиты на которые вы можете перевести помощь, поддержку, благодарность и на развитие канала
ДОНАТ -- DONATE
https://streamlabs.com/vgeni4kadisass...
https://www.donationalerts.com/r/evge...
ВЕБМАНИ / webmoney
Z299720621617 Сша доллар
E513530553569 Европа евро
#Xiaomi #Mi6 #replacement
4 سال پیش
در تاریخ 1400/01/08 منتشر شده
است.
0
بـار بازدید شده