Stud Wall. Cutting the Frame. Owner Builder Series Ep 14.

DIYForKnuckleheads
DIYForKnuckleheads
20.9 هزار بار بازدید - 9 سال پیش - #studwall
#studwall #ownerbuilder #diyforknuckleheads
http://diyforknuckleheads.com Setting out the Wall Plates for a Stud Wall. G’day Knuckleheads, Uncle Knackers here. In this Episode we look at setting out our wall plates and cutting the timber for the stud wall frames. Just remember that it's really important to cut your wall studs  to the correct height. All stud walls have a bottom plate and a top plate. External walls also have a pitching plate which sits on top of the top plate. Make sure when cutting your studs for your stud wall that you take the thickness of all the plates into consideration. Check it out!

Before l go on...

DIY For Knuckleheads Website: https://diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
shaneconlan1
-------------
Tools l Use: https://diyforknuckleheads.com/tools-...
-------------
Mailing Address:

DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
https://shop.spreadshirt.com.au/DIYFo...
------------
Check us out on Facebook;
Facebook: DiyForKnuckleheads
------------

ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
Permits and the Owner Builder Course....

Music supplied by Jason Shaw at www.audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short
http://incompetech.com/music/royalty-...
Kevin McLeod: Feelin Good.

Have a great day and l’ll see you again real soon. ☺

Cheers,
Uncle Knackers

Please Note:

All Videos produced by shaneconlan1's YouTube Channel are provided for informational purposes only.

All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.
9 سال پیش در تاریخ 1394/05/10 منتشر شده است.
20,958 بـار بازدید شده
... بیشتر