INSTALL: Extended pedal (SRP Racing)
10.8 هزار بار بازدید -
7 سال پیش
-
We install an extended gas
We install an extended gas pedal I bought from http://www.srpracing.com/
General steps: (1) Drill out rivets from factory pedal (we used a 1/16" bit and put a box behind to keep the pedal still) (2) Remove pedal cover (3) Use tape to diagram the desired holes and apply to metal pedal (4) Create pilot holes/holes large enough to fit screws (5) Insert screws and install new pedal
General steps: (1) Drill out rivets from factory pedal (we used a 1/16" bit and put a box behind to keep the pedal still) (2) Remove pedal cover (3) Use tape to diagram the desired holes and apply to metal pedal (4) Create pilot holes/holes large enough to fit screws (5) Insert screws and install new pedal
7 سال پیش
در تاریخ 1396/09/19 منتشر شده
است.
10,800
بـار بازدید شده